Loading ...
Loading ...
Loading ...
— 13 —
Installation
STEP 9
Install top vent plate and rear damper (For rear venting only)
•Re-install the plate removed in step 7 to block top venting hole.
•Put plate in position and put in 4 screws from step 7 (see Figure 10).
•Install rectangular air damper outlet on the rear vent location (see Figure 11).
•Connect duct work to damper.
•Use Duct Tape to ensure joint is sealed and air tight.
Figure 11
STEP 11
Attaching the unit to the wall
•Mark or drill a small hole on the mounting position according to the dimensions on the following drawings.
•Insert suitable screws into the holes.
•Hang the range hood onto the screws.
The following drawings show the mounting dimensions of the 30 in. (750 mm) width.
Method 1: attach the ducting to the top round 6 in. damper and exhaust outdoors.
Figure 10
Figure 13
190 mm (7.48 in.)
170 mm
(6.69 in.)
180 mm
(7.08 in.)
708 mm (27.87 in.)
28 mm
(1.1 in.)
28 mm
(1.1 in.)
38 mm
(1.5 in.)
230 mm
(9.05 in.)
STEP 10
Assemble the Storage Bar
•Align bar to the mounting holes and use M4 × 12 mm
screws to x the bar on the hood (Figure 12).
Take protective measures to prevent injuries, such as
wearing gloves.
Figure 12
Loading ...
Loading ...
Loading ...