Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting tips
"F- anda number
or letter"flash
in thedisplay
Possible Causes
You have a function
error code,
What ToDo
• Disconnect all power to the range for at least 30
seconds and then reconnect power. If the flmction
error code repeats, call fin" service.
• On sell=cleaning models, if a flmction error code
appears during the sell=cleaning cycle, check the oven
door latch. The latch may have been moved, if only
slightl 5 fl'om the locked position. Make sure the latch
is moved to the right as tar as it will go, Touch the
CLEAR/OFFpad. Mlow the o'_en to cool fin" one hour.
Put the oven back into operation.
Display flashes "bAd" The installed cmmection • Contact installer or electrician to correct miswire.
then "linE" with a from the house to the unit
loud tone is miswired.
Display goe s blank A fuse in your home may be • Rel)lace the tuse or reset the circuit breaker:
blown or the circuit
breaker tripped.
The clock is turned off from • See the Using the clock and timer section.
showing in the display.
Displayftashes Power failure. • Reset the oh)ok.
Unable to get the Oven control pads were • The BAKEand BROILHl/LOpads must be touched
display to show "SF" not pressed properly, at the same time and held for 3 seconds.
Power outage, Power outage or surge. • Reset the clock. If the oven was in use, you must reset
clock flashes it by touching the CLEAR/OFFpad,setting the clock
and resetting any cooking flmction.
"Burning" or "oily" This is normal in a new • To speed the process, set a sellZcleaning c)cle
odor emitting from oven mzd will disappear for a minimum of 3 hours. See the Using the
the vent in time. self-cleaning oven section.
Strongodor An odor from the insulation • This is temporary.
aromad the inside of the
oven is normal for the first
few times the oven is used.
24
Loading ...
Loading ...
Loading ...