Loading ...
Loading ...
Loading ...
57
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
-
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
F
Detail D
SCALE 1 : 1.88
Detail E
SCALE 1 : 1.88
Detail F
SCALE 1 : 1.88
TYPICAL 4 PLACES
Side Burner shown
with front face
removed for clarity
Side Burner shown
with back panel
removed for clarity
The end panel is connected
to the top front of the side
burner at this position. Do
not overtighten the screw.
The end panel bracket connects the
rear of the side burner to the end
panel at this position. The bracket
hooks behind the panel and is
bolted in place from the front.
The end panel bracket is attached to the back
of the side burner at this position. Ensure the
end panel is pushed tight against the side of
the side burner before tightening the bolt.
The end panel is attached to the side
burner cabinet four places. Position the
hardware but do not tighten it until the
end panel is aligned with the side burner
End Panel to Side Burner
Bracket Package
IB-EP-ICMSB
Loading ...
Loading ...
Loading ...