Loading ...
Loading ...
Loading ...
55
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
-
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
F
Detail D
SCALE 1 : 1.88
Detail E
SCALE 1 : 1.88
Detail F
SCALE 1 : 1.88
TYPICAL 4 PLACES
Storage cabinet
shown with front door
removed for clarity
Storage Cabinet
shown with back panel
removed for clarity
The end panel bracket
shown is positioned behind
the formed flange of the end
panel when installed.
The end panel bracket connects the
rear of the storage cabinet to the
end panel at this position. The
bracket hooks behind the panel and
is bolted in place from the front.
The end panel bracket is attached to the back
of the storage cabinet at this position. Ensure
the end panel is pushed tight against the side
of the cabinet before tightening the bolt.
The end panel is attached to the
storage cabinet at four locations.
Position the hardware but do night
tighten it until the end panel is aligned
with the cabinet
End Panel to Storage Cabinet
IB-EP-ICM
Storage cabinet
shown with end panel
removed for clarity.
End panel bracket is
installed with hardware
provided from the inside
of the cabinet as shown
Loading ...
Loading ...
Loading ...