Loading ...
Loading ...
Loading ...
20
Before cleaning, ensure the cooker is turned off.
Remove the power plug from the power outlet
and remove the connector end of the power
cord from the cooker base. Allow the cooker
and all accessories to cool completely before
disassembling and cleaning.
Wash removable cooking bowl with warm
soapy water and a clean soft cloth or sponge.
Rinse with clean water and dry thoroughly.
If limescale deposits develop over time,
combine 2 tablespoons of white vinegar and
1 cup hot water in the cooking bowl and heat
using the steam function for 10 minutes before
cooling and cleaning with a scrubbing brush.
NOTE
Removable cooking bowl can be washed in
dishwasher, but it is recommended to wash
cooking bowl in hot, soapy water using a
mild household detergent. Rinse and dry
thoroughly.
WARNING
• Do not use abrasive cleaners, steel wool or
scouring pads on the outer and inner body of
the appliance.
• Do not immerse metal base or power cord in
water or any other liquid as they may cause
electrocution.
• Ensure removable cooking bowl is correctly
positioned in the base before you commence
cooking.
Care & Cleaning
• Time will start counting down and preheat
LED will not be illuminated during DELAY
START.
ALTITUDE ADJUST
Pressure builds and increases when the
temperature inside the cooking bowl exceeds
boiling point. As altitude increases, the
temperature at which water boils decreases as
a result of the drop in air pressure. This creates
very different conditions for cooking when
using a pressure cooker.
In order to maintain consistent cooking results
at various altitudes, the Fast Slow GO™ has an
Altitude Adjust feature that adjusts the settings
based on the altitude of your current location.
1. To enter Altitude press and hold both the
DELAY START and KEEP WARM buttons
for 2 seconds.
2. Press the TIME (+/-) buttons or the
PRESSURE/TEMPERATURE (+/-) buttons
to adjust altitude.
3. Four-digit display shows ‘Alt’ and number,
switching every 1 second.
4. Press START button to confirm and a beep
will sound.
5. The cooker’s settings have now been
adjusted for your current altitude. Pressing
any button or quitting after timeout will
save the current set altitude value. To
change altitude to factory settings, adjust
the altitude back to 0 metre.
NOTE
Exact altitude can be found at
www.elevationmap.net or by contacting
Breville Customer Service Centre.
SETTING THE UNIT MEASURE
The unit measure default is in Celsius (C). To
change between metric and imperial units,
press the PRESSURE/TEMPERATURE (+/-)
buttons for 5 seconds and the display will
show F for Fahrenheit. Press the PRESSURE/
TEMPERATURE (+/-) buttons again for 5
seconds to revert to Celsius and the display will
show C.
Loading ...
Loading ...
Loading ...