Loading ...
Loading ...
Loading ...
10
mWARNING! This charger does not automatically turn o
when the battery is fully charged. Please take care not to leave
the battery plugged into the charger. Switch o or unplug the
charger at the mains when charging is complete.
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become
fully discharged as this will cause irreversible damage to
the battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
m
CAUTION! To prevent accidental starting that could
cause serious personal injury, always remove the battery pack
from the product when assembling parts.
1. Insert the water outlet end of the trigger gun into the end
of spray wand as show (Fig. 4), and thread to tighten.
2. Insert the trigger gun inlet end into the trigger gun
connection on the hose and thread to tighten securely
(Fig. 5). The sprayer is ready to use.
Operation
m
WARNING! Do not allow familiarity with the product
to make you careless. Remember that a careless fraction of a
second is sucient to inict serious injury.
mCAUTION! Always wear eye protection during
operation. Failure to do so could result in uids entering your
eyes resulting in possible serious injury.
This garden sprayer is designed for use with most consumer
grade home and garden chemicals, such as insecticides,
fungicides, weed killers, and fertilizers. Follow instructions
below for proper operation of this unit.
mWARNING! The garden sprayer is intended for
household use only.
Filling the Tank
mWARNING! Always follow the chemical manufacturer’s
instructions printed on their product labelling for use, cleaning,
and storage. Clean thoroughly after each use, following
the instructions in the Maintenance section of this manual.
Chemicals should be stored out of the reach of children.
Failure to do so may result in serious personal injury.
Liquids to be sprayed must be as thin as water. Thicker liquids
will not spray properly. Follow the instruction below to ll the
tank with proper solution. You can also premix the solution and
pour it into the tank, using a funnel if needed.
mWARNING! If powder detergent is desired, make
sure to dissolve the powder in water completely to avoid any
clogging.
NOTE: If using a measuring container other than the cup, or if
using a funnel to ll the tank, be sure to thoroughly clean and
rinse these items after use. If premixing the spray solution,
rinse the container used for mixing.
1. Turn o the unit and remove the battery.
2. Unscrew the measuring cup and remove it from the tank
(Fig. 6).
Fig. 4
Trigger gun
Spray wand
Fig. 5
Trigger gun
Trigger gun connection
Hose
Fig. 6
Measuring
cup
Tank
Loading ...
Loading ...
Loading ...