Loading ...
Loading ...
Loading ...
Grate
Burnercae
Burnerhead
Electrode
Sealed Burner Assemblies--glass cooktop models
Turn all controls OFFbetore removing tile
burner pmls.
The burner grams, caps, and burner heads
can be litied oil making them easy to clean.
_ Electrode
/
When one burner is turned to LITE,
all tile burners spark. Do not attempt
to disassemble or clean m{nmd any
burner while another burner is oil. An
elecuic shock may result, which c{nlld
cruise y{nl to knock over hot cookw, ue.
A CAUTION: Do not operate flTe
burner wiflwut all burner parts in
place.
After cleanflTg make sure the
nipple f17the burner head is
positioned toward the electrode.
Rotate the burner head around the
burner base until it is level and
securely seated.
Burner Heads
NOTE: Before removing the burnerheadsand
caps,remember thek sloe and location.Replace
them in the same location after cleaning.
Theshts /n the burner heads of yourrange must be
kept clean at all times for an even, unhampered
flame.
You should clean tile SUltilce burners
routinely, espedally at/er bad spillovers,
whkh could dog these openings.
To rem(_ve burned-on fi)od, soak tile
burner heads in a solution of mild liquid
detergent and hot water fi)r 20-30inilmtes.
For more stubborn stains, use a toothbrush.
Before putting tile burner head back, shake
out excess water and then d U it thoroughly
by setting it in a warm oven fi)r 30 minutes.
Replace tile burner heads and caps. Make
sure that the heads and caps me replaced in
the conect location. There are 2 large, one
medium and one small head and cap.
S,ea,
Medlurn
Burner Caps
I,iti offwhen cool. Wash burner caps in hot,
soapy water and rinse wifll clean water. You
illay SCOUI"with a plastic: scouring pad to
remove burned-on food particles.
DI T theln ill a watiil oven or with a cloth-
don't reasselnble theln wet. Repla(e the
burner caps.
Make sure that caps are replaced on tile
(orre(t size burner. There are 2 large, one
medium and one small head and cap.
33
Loading ...
Loading ...
Loading ...