Loading ...
Loading ...
Loading ...
10
ENG
INSTALLATION
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30 mm. Please select heat-resistant work surface material to
avoid larger deformation caused by the heat radiation from the hotplate.
As shown below:
Selection of installation equipment
L (mm) W (mm) H (mm) D (mm) A (mm) B (mm) X (mm)
290 520 60 55 265 495 50 min
SEAL
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls
protruding from the hob.
Before locating the fixing brackets
Installation
Strech out the supplied seal along the underside edge of the hob, ensuring the ends overlap.
Do not use adhesive to fix the hob into the worktop.
Once the seal is fitted position the hob into the cutout
in the worktop. Apply gentle downwards pressure onto
the hob to push it into the worktop ensuring a good
seal around the outer edge (fig.3)
Fig. 1
Fig. 2 Fig. 3
01
[04] x1
Loading ...
Loading ...
Loading ...