Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
100
Cold water (default setting)
The washing machine will be operated
with cold mains water only.
The other intake hose is secured to the
back of the washing machine.
Hot water
- The preferred temperature is 55°C.
The temperature must not not exceed
60°C. Consult a qualified plumber if
the temperature exceeds 60°C.
- You can heat up your water with
cheaper, primary energy sources, e.g.
gas, solar power, oil.
- Before connecting to the mains water
stopcock, check that the outflow of
cold water does not exceed 5litres.
Each additional litre of cold water re-
duces the energy efficiency.
- If the hot water tap is turned off for
some time, the washing machine will
automatically switch to the cold wa-
ter connection. This safety measure
is not intended for the permanent op-
eration of the appliance and will af-
fect wash results.
Soft water, rain water and well water
1. For hygiene reasons water should be
at least of the quality used for
bathing in.
2. The chemical composition of the wa-
ter must not endanger parts of the
machine.
3. The water must not contain any solid
particles e.g. sand. We recommend
an upstream filter with a filtration
throughflow of 0.1mm.
Other specifications for water quality
Iron ≤ 0.10mg/l
Manganese ≤ 0.05mg/l
Copper ≤ 0.10mg/l
Zinc ≤ 1.50mg/l
Chlorides ≤ 200.00mg/l
pH value 5-9.5
Water hardness ≥ 5°d
Water temperat-
ure
≤ 60°C
The operator is responsible for en-
suring a suitable water quality.
Loading ...
Loading ...
Loading ...