This useful adapter attaches to the center hinge of most Porro or
roof prism binoculars, allowing you to mount them to any tripod
equipped with a standard ¼” x 20 mounting bolt. A must for
vibration-free viewing, this adapter conveniently sets your hands
free for other tasks while observing.
INSTALLATION
1. Attach the bottom of the binocular adapter to the ¼” - 20
thread on your photo tripod.
2. Remove the cap screw on your binoculars that covers the
threaded mounting port. This will be located between
the two binocular barrels.
3. Thread the binocular adapter into the mounting port on
your binocular. Tighten the bolt so that the binoculars stay
securely in place.
www.celestron.com
2835 Columbia Street • Torrance, CA 90503 U.S.A.
Telephone: 310.328.9560 • Fax: 310.212.5835
©2022 Celestron
All rights reserved.
01-22
BINOCULAR TRIPOD ADAPTER
ITEM # 93524
Binocular
Tripod Adapter
Binocular
Tripod Adapter
¼” - 20
Mounting Port
Tripod Head
with 1/4” - 20
Mounting Bolt
Binocular tripod adapter shown with binoculars and tripod (not included)
WARRANTY
One year limited warranty. See the Celestron Accessory
Catalog (#93524) for complete warranty details or
contact Celestron.
Product design and specications are subject to change
without prior notication.
This product is designed and intended for use by those
14 years of age and older.
