Loading ...
Loading ...
Loading ...
- Then use the mounting screws provided with your water heater to secure to the wall. (The water
heater unit is heavy when filled with water and it is advisable to install wooden batons along the
screw locations if necessary.) Refer to Diagram 14.
- Install all gas and water piping according to the instructions in your water heater user manual.
Check for gas and water leaks. Then test and check the operation of the water heater.
- Once all the above works have been completed, fit the cover to conceal the pipework. To do this
first tilt the cover slightly and insert under the water heater front panel flange and then carefully
adjust and position the cover to insert its hooks (x4) into their respective slots on the brackets on
the recess box side walls. Refer to Diagrams 15 & 16.
IMPORTANT! Use a weatherproof electrical socket if necessary and weatherproof the
recess box if required by using suitable sealant along the external joints and around the
pipework.
V1
4
Distributed by:
SHINDA INTERNATIONAL PTY LTD
: 1300 358 770 : (02) 9773 7399