Loading ...
Loading ...
Loading ...
6
www.insigniaproducts.com
4 Peel off the label covering the ice maker hole on the back of the refrigerator,
then remove the foam from the hole with the needle nose pliers. Retain the
foam for future use.
5 Push the water inlet tube into the small hole on back of refrigerator. Rotate
while inserting the tube until the flat surface of inlet tube is tight against the
back of the refrigerator.
6 Secure the water inlet tube to the back of the refrigerator with two self-drilling
screws (provided).
Note: Use the short water inlet tube if you have a 18 cu. ft. freezer and the long
water inlet tube if you have a 21 cu. ft. freezer.
Remove label
Loading ...
Loading ...
Loading ...