Loading ...
Loading ...
Loading ...
14
www.insigniaproducts.com
16 Reconnect the refrigerator to the electric wall outlet.
17 To turn on the ice maker, lower the wire signal arm.
Tips for using your automatic ice maker
Remember that water quality determines the quality of ice. The ice maker should
not be connected to softened water. If the water softener has problems, chemical
substances can damage the ice maker.
To turn off the ice maker, raise the wire signal arm until it locks in the “up” (off)
position. When the ice storage bin is full, the wire signal arm will hit the ice cubes
and the ice maker will automatically shut down.
If you store ice cubes too long they may produce a peculiar smell. To eliminate the
smell, empty the ice storage bin, wash it out, then replace it. The ice maker will
produce more ice cubes.
Shake the ice storage bin from time to time to ensure that the ice cubes separate
from each other.
Before the refrigerator is connected to the water supply system, or any time the
water supply is turned off, the wire signal arm should be in the “up” or (off)
position.
Maintaining your ice maker
Use mild detergent in warm water to clean the ice storage box, then rinse and dry
it.
Turn off the ice maker when you clean your refrigerator or plan to be away for a
short period.
If you are going away for an extended period, turn off the water supply valve.
Important: It takes approximately 24 hours for the ice maker to begin
producing usable ice. Air in new plumbing lines may cause the ice maker to
cycle two or three times before making a full tray of ice. New plumbing may
cause ice to be discolored or have poor flavor. Discard ice made during the first
24 hours.
On
Off
Wire signal arm
Loading ...
Loading ...
Loading ...