Loading ...
Loading ...
Loading ...
17
FLASHING
The machine must be descaled. The descaling procedure described in the sec-
tion “Descaling” needs to be performed as soon
as possible.
FLASHING
Too much coee has been used. Select a milder taste or reduce the quantity of
pre-ground coee then make the coee again.
FLASHING
The coee beans have run out. Fill the beans container
The pre-ground coee funnel is
clogged.
Empty the funnel with the help of a knife as
described in the section "Cleaning the pre-
ground coee funnel".
FLASHING
The infuser has not been replaced
after cleaning.
Insert the infuser as described in the section
“Cleaning the infuser”.
The inside of the appliance is very
dirty.
Clean the inside of the appliance thoroughly,
as described in the section “Cleaning and
maintenance”.
If the message is still displayed after cleaning,
contact a customer services.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
PROBLEM POSSIBLE CAUSE REMEDY
The coee is not hot The cups were not preheated. Warm the cups by rinsing them with hot water
(Please note you can use the hot water or rinse
function).
The infuser has cooled down because 2/3 mi-
nutes have elapsed since the last coee was
made.
Before making the coee, warm the infuser by
pressing the rinse button
.
The coee is thin or not cre-
amy enough.
The coee is ground too coarsely. Turn the grinding adjustment dial one click an-
ticlockwise while the coee mill is in operation
(g. 8).
Continue one click at a time until coee delive-
ry is satisfactory. The eect is only visible after
delivering two coees (see the section: “Adju-
sting the coee mill” on page 11).
The coee is unsuitable. Use pre-ground coee for espresso coee
makers.
Loading ...
Loading ...
Loading ...