Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com10
Choke lever
Note: When cold start, please close
(pull) the choke lever. When warm start,
please open (push) the choke lever.
Energy-saving switch
When the energy-saving switch is in
"ON" position, the energy saving
equipment controls the engine rotate
speed according to the connected
loads. There will be good fuel
consumption and low noise. When the
energy-saving switch is in "OFF"
position, the engine will always run in
rated rotate speed no matter it is
connected to the loads or not.
Note: Please set the energy-saving
switch to "OFF" position when connect
to air compressor, sinking pump etc.,
because these equipments need large
starting current.
Grounding terminal
The grounding terminal is designed to
prevent electric shock by connecting it
to the grounding wire. The generator
set must be properly grounded before
operation.
ON and RUN switch
(engine stop & fuel switch)
When the switch is in "ON" position, it
indicates that the engine is turned ON
and fuel switch are in off state.
Loading ...
Loading ...
Loading ...