Loading ...
Loading ...
Loading ...
Viewing Measured Time Data
Viewing Lap/Split Records
You can use the operation below to view split
times and lap times.
1. Enter the Recall Mode.
l
Navigating Between Modes
●
This causes the latest measurement
number and date to appear.
Measurement date
Measured time
Record number
2. Press (A) to cycle through measurement
numbers.
●
Each time you press (A), the next older
measurement number appears.
A
A
A
A
3. Use (D) and (E) to display the
measurement value you want.
[LAP]: Lap time
[SPL]: Split time
E
D
Note
●
A record of the measured data is
created and assigned a number for
each measurement operation (from
start to stop).
Deleting a Particular Record
Use the procedure below to delete a selected
data record.
1. Enter the Recall Mode.
l
Navigating Between Modes
2. Press (A) to display the number of the
measurement you want to delete.
●
Each press of (A) advances to the next
measurement number.
Record number
3. Hold down (D) and (E) at the same time
for at least two seconds. Release the
buttons when [CLR] stops flashing.
This deletes the displayed data.
Note
●
You cannot delete data while an
elapsed time measurement operation
is in progress.
Deleting All Records
You can use the procedure below to clear all
data records in watch memory.
Important!
●
The all record delete operation cannot
be performed while a stopwatch
measurement operation is in progress.
1. Enter the Recall Mode.
l
Navigating Between Modes
2. Hold down (D) and (E) at the same time
for at least five seconds. Release the
button when [CLR ALL] stops flashing.
[CLR] flashes and then stops flashing to
indicate that the displayed data record
was deleted. Keeping the buttons
depressed will cause [ALL] to flash and
then stop flashing to indicate that all data
has been deleted.
Timer
The timer counts down from a start time
specified by you. The watch beeps every
second for the last five seconds of the
countdown.
●
The beeper is muted in the cases described
below.
ー
When battery power is low.
Getting Ready
Enter the Timer Mode.
l
Navigating Between Modes
Operation Guide 3486
12
Loading ...
Loading ...
Loading ...