Loading ...
Loading ...
Loading ...
5. Use (D) and (E) to change the target time
hour setting.
Hours
6. Press (C).
7. Use (D) and (E) to change the target time
minute setting.
Minutes
8. Press (C).
9. Use (D) and (E) to change the target time
second setting.
Seconds
●
If you want to specify multiple target
times, repeat steps 2 through 9 above.
10. Press (A) to exit the setting screen.
Measuring Elapsed Time with the
Target Time Function
You can perform the same elapsed time
operations as those described in the sections
below.
l
Measuring Elapsed Time
l
Measuring a Split or Lap Time
Starting an elapsed time operation will cause
[TGT] to flash on the display.
An alarm will sound for 10 seconds to let you
know when the elapsed time operation
reaches a target time you set.
[TGT] disappears from the display when the
elapsed time operation exceeds the last target
time.
Note
●
[TGT] will appear if you stop time
measurement while there is one or
more target time remaining.
Clearing a Specific Target Time
Use the procedure below to clear a selected
target time.
1. While the stopwatch is reset to all zeros,
hold down (A) for at least two seconds.
Release the button when [TGT] appears.
2. Press (C).
3. Use (D) and (E) to display the number of
the target time you want to clear.
Target time number
4. Press (C).
5. Hold down (D) and (E) at the same time
for at least two seconds. Release the
buttons when the selected target time
becomes [0:00 00].
This indicates that the selected target time
was cleared.
6. Press (A) to complete the operation.
Clearing All Target Times
The procedure below clears all target times,
and restores the target time settings to their
initial factory defaults.
Factory Default Settings
●
Target Time 1: 5 minutes
●
Target Time Function: Off
1. While the stopwatch is reset to all zeros,
hold down (A) for at least two seconds.
Release the button when [TGT] appears.
2. Press (C).
Target time number
3. Hold down (D) and (E) at the same time
for at least five seconds. Release the
button when [ALL] stops flashing.
This restores target time settings to their
initial factory defaults.
4. Press (A) to complete the operation.
Operation Guide 3486
11
Loading ...
Loading ...
Loading ...