Loading ...
Loading ...
Loading ...
Programmable functions
89
Postponing the update
After the washing machine is switched
on, appears in the time display.
Touch the sensor.
The running time of the selected
programme appears in the time display.
The next time you switch on the
appliance, you will be prompted to start
the update again.
Switching off Wi-Fi
Turn the programme selector to the
MobileStart programme.
appears in the time display.
Touch and hold the sensor until
the countdown in the time display
has finished.
appears in the time display.
- The Wi-Fi is switched off.
- The Wi-Fi connection will be reset to
the factory setting.
The network configuration should be
reset whenever a washing machine is
being disposed of or sold, or if a
used washing machine is being put
into operation. This is the only way to
ensure that you have removed all
personal data and, in the case of the
latter, the previous owner can no
longer access the washing machine.
A new connection set-up has to be
carried out in order to use
Miele@home again.
Copyright and licences for the
communication module
For the purpose of operating and
controlling the communication module,
Miele uses proprietary or third-party
software that is not covered by open
source licensing terms. These items of
software/software components are
protected by copyright. The copyright
powers of Miele and third parties must
be respected.
In addition, the communication module
contains software components which
are distributed under open source
licensing terms. The open source
components contained in the appliance
along with the corresponding copyright
notices, copies of the licensing terms
valid at the time, and any further
information can be accessed locally via
IP using a web browser (http://<IP
address>/Licenses), where <IP
address> is the IP address of the
appliance. The liability and warranty
arrangements for the open source
licences displayed in this location only
apply in relation to the respective rights
holders.
Loading ...
Loading ...
Loading ...