Loading ...
Loading ...
Loading ...
Please read through completely before using your O nit
5
your safety matters
A NING
any other appliance.
A NING FO O TDOO SE ON Y
A NING POTENTIA CA ON ONO IDE A A D
space can kill you. Never use this appliance in an enclosed space such as a camper, tent,
car, or home.
A NING
replaced by a trained, service professional using only factory original parts following
manufacturer’s guidelines. Failure to follow these guidelines may result in property damage,
Your fire pit is configured to burn natural gas, it may be converted by a trained professional
back side of burner. Never use any other alternative fuel sources.
C
A TION
Do not use charcoal or other solid fuel in gas burning appliances. Do not use your fire table
for cooking. Do not heat any unopened glass or metal container of food in the fire table.
Pressure may build up and cause the container to burst, possibly resulting in serious personal
injury or damage to the fire table. Never use the fire table in windy conditions. If used in a
consistently windy area a windbreak will be required.
Always adhere to the specified clearances listed in this manual.
Never allow clothing or other flammable materials to contact any hot surface until it has fully
cooled. Never wear loose fitting or hanging garments while using your fire table. Fabric may
ignite and result in personal injury. When handling propane gas line and connectors, do not
allow them to contact any metal surfaces. Do not drop propane connectors.
NEVER use your fire pit as an incinerator to burn other materials.
GAS SAFETY
1. Turn the ON/OFF valve located on the side of the fire table completely to the ON position.
2. Make sure fuel supply (LP or NG) is properly connected and turned on at the source. This
will be either the LP tank or the NG valve.
3. When you hear gas flowing, use either a long stem wooden match or a butane fireplace
lighter to place a flame near the burner.
4. If the burner does not light, does not stay lit, or the flame is very low, shut off the gas supply
and wait five minutes to allow all fumes to clear. Start again from Step 1, making sure all gas
valves are completely opened.
| LIGHTING THE UNIT
Loading ...
Loading ...
Loading ...