Loading ...
Loading ...
Loading ...
10
set-up and installation
1. Carefully place the fire pit in the final designated area. S
ee below for lifting instructions.
2. Your fire pit will arrive with the burner and burner plate set in the unit. You will need to
lift up the plate to access the gas inlet.
Natural Gas Installation
a. The gas line between the burner and the gas valve located on the side of the fire bowl
has already been connected at the factory.
b. You will then connect the flex line hose from the plumbed gas line to open gas valve.
Propane Installation
a. The gas line between the burner and the gas valve located on the side of the fire bowl
has already been connected at the factory.
b. Then connect the propane hose from the gas valve to the propane tank.
3. After all gas connections have been secured and checked by a licensed plumber or
contractor, place burner pan in final locations on top of concrete ring that sits in the fire bowl.
4. Test burner unit before adding lava stone or glass in unit.
5. After you have completed all the plumbing installation, fill the fire bowl with the lava rock
provided. You can place the lava rock on the burner, but not more than 1" thick.
Excessive filler material can impede gas flow causing gas build-up and a potential explosive hazard.
CAUTION: The product is EXTREMELY HEAVY, TEAM LIFT and use equipment dollies to transport.
Transport the unit BASE DOWN or resting on it’s side. DO NOT use wheelbarrows or handtrucks.
Gently place the unit in it’s final position.
DO NOT use
wheelbarrows
or handtrucks.
LOCATING YOUR UNIT:
In placing your fire pit - consider prevailing wind patterns.
If used in a consistently windy area a windbreak will be required.
Always adhere to the specified clearances listed in this manual.
Sides & Back.........................36 inches (122 cm)
Top.........................................84 inches (305 cm)
These units generate tremendous heat - keep the area clear of
materials which may ignite, melt or be deformed by heat.
Loading ...
Loading ...
Loading ...