Loading ...
Loading ...
Loading ...
8
- Press
and buttons simultaneously 2 seconds to exit,
brightness adjustment will not be saved.
- Only press
button to confirm, then the DIY setting will be
finally saved and exit.
- latest saved DIY setting will cover the previous DIY setting. there
is only one latest pattern to be saved under DIY pattern.
- if press the main power switch to shut down the speaker directly,
the DIY adjustment will not be saved properly, only user press
the power button to enter the deep standby mode first then
press the main power switch. The DIY setting will be finally saved
for next time.
7.5 Broadcast mode
Broadcast Mode allows you to play your audio through multiple
soundbar speakers. The backlights of
button will be constant
blue when soundbar on Broadcast Mode
Button Backlights Status
Blue (Constant)
Broadcast mode on
1. Press
and buttons simultaneously 2 seconds to enter or
exit Broadcast mode.
2. Repeat Step 1 for all additional soundbars.
3. When in broadcast mode the backlight of
button will be
constant blue status.
BROADCASTING
1
2
Notes:
- Broadcast Mode is compatible with AUX-IN, USB-Disk and
Bluetooth input sources.
- Both audio and the RGB light will synchronize on broadcast mode
- Local source (Bluetooth/AUX-IN&USB) can break-in
broadcasting mode: Secondary soundbar receives music from
other soundbar only when local source not playing on Secondary
soundbar
- In Broadcast mode, only the Primary soundbar will synchronize
the volume or RGB light change to other soundbar, while the
Secondary/third /forth…. soundbar will not synchronize the
volume change to other soundbar.
- RALLYBAR can connect with RALLYBAR, RALLYBAR S and
RALLYBAR XL in Broadcast mode
- Multiple soundbars Broadcast mode connect scenarios example
below:
A
soundbar
B
soundbar
C
soundbar
Result
Scenario 1 playing
music
when enter
broadcast
mode
Not playing
music
when enter
broadcast
mode
/ A is primary, B
is Secondary
A
soundbar
B
soundbar
C
soundbar
Result
Scenario 2 playing
music
when enter
broadcast
mode
playing
music
when enter
broadcast
mode
/ Both A and B
are primary,
cannot
connect to
each other;
need one
of the 2
soundbars
stopping
music to
become
secondary.
Scenario 3 playing
music
when enter
broadcast
mode
playing
music
when enter
broadcast
mode
Not
playing
music
when enter
broadcast
mode
Both A and B
are primary, C
will connect A
or B randomly
to become
the secondary
7.6 Party Mode
One soundbar have simultaneous connection of up to two
Bluetooth
®
devices.
PARTY MODE
Notes:
- When turn off the soundbar speaker, it will only connect the
device with the latest action automatically, user need manually
connect the second device.
- Maximum 2 devices connect at same time, Last action on one of
the devices will always take the control.
- Third device cannot find soundbar speaker’s name when there
are 2 phones are connected.
7.7 DEMO Mode
Button Press Behaviors
5S
To enter or exit DEMO mode
To enter or exit form DEMO MODE, press and hold
“Bluetooth”&“play/pause” button at same time 5 seconds
NOTES:
- Only AUX audio can work, USB & Bluetooth is disabled
- Long Press light button will switch to next pattern. short press
for MAP lights turn on/off/50%
Every 30 seconds, auto switch to next light pattern in following
sequences:
Rock -> Flow -> Cross -> Ripple -> Flash -> Static1 -> Static2 -> Mix
if no action for 1 hours, device will auto switch to default pattern Rock
7.8 DEEP STANDBY MODE
The product will enter into Deep standby mode
• If there is no Bluetooth connection and there is no any action
over 15 minutes.
• If there is Bluetooth connection and there is no any action over
1 hour.
Loading ...
Loading ...
Loading ...