Loading ...
Loading ...
Loading ...
9
Note:
- Power button’s backlight is on white and slow flash status and rest
buttons’ backlights are off, if product is on Deep standby mode
- The MAP light can be turned on or off in Deep standby mode,
while if there is no any button press action over 15 minutes, MAP
lights will shut-off automatically.
- Press the power button, the product will exist from deep standby
mode
7.9 FACTORY RESET
To restore the factory settings, Press
and buttons
simultaneously 10 seconds.
7.10 Firmware Upgrade Service
USB CONNECTION
Button Press Behaviors
10S
Firmware version check
1S
firmware upgrade
1. Firmware Version Check:
When main power switch is on and soundbar in operation
mode, Press and hold “volume down” & “BT” button at same
time over 10 seconds, the machine voice out the firmware
version number
2. Firmware Upgrade by U Disk (Flash drive)
1) Download the latest firmware to a USB stick (the USB Disk
file system need to be FAT32or FAT16)and plug the USB
Stick into USB port.
2) Make sure the main power switch is off. Press and hold the
“volume up” & “BT” button at same time then turning on the
main power switch, after 1 second, release hand from the
“volume up” & “BT” buttons to trigger the firmware upgrade.
Note:
- You can download the latest firmware on JBL Website(www.JBL.
com) If there is new firmware release
8. SPECIFIATION
RALLYBAR RALLYBAR S RALLYBAR XL
Product Description
21" Bluetooth
®
Universal Outdoor
Vehicle Soundbar with LED lights
and 150Wrms amplifier
21" Bluetooth
®
Universal Outdoor
Vehicle Soundbar with 150Wrms
amplifier
35" Bluetooth
®
Universal Outdoor
Vehicle Soundbar with LED lights
and 300Wrms amplifier
Transducers:
4 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
2 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
4 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
2 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
8 x 2.75" (70mm) woofers;
2 x 1" (25mm) Tweeters;
4 x 7.2" (182.8mm) x 3" (76.2mm)
Racetrack Passive Radiators
Output Power: 150WRMS; 300W PEAK (IEC60268) 150WRMS; 300W PEAK (IEC60268) 300WRMS; 600W PEAK (IEC60268)
THD at Rated RMS Power: <1% <1% <1%
Voltage Range: 9.6 - 16VDC 9.6 - 16VDC 9.6 - 16VDC
Quiescent Current Draw: <0.9A <0.9A <0.9A
Maximum Current Draw: 25A 25A 40A
Frequency response: 45Hz-40kHz 45Hz-40kHz 45Hz-40kHz
Signal-to-noise Ratio: > 80 dB > 80 dB > 80 dB
Cable type 12AWG. 12AWG. 10 AWG.
Cable length 12 Feet (3.66m) 12 Feet (3.66m) 12 Feet (3.66m)
Bluetooth
®
Version 5.3 5.3 5.3
Bluetooth
®
Profile A2DP V1.3, AVRCP V1.6 A2DP V1.3, AVRCP V1.6 A2DP V1.3, AVRCP V1.6
Bluetooth
®
transmitter
frequency range
2400 MHz – 2483.5 MHz 2400 MHz – 2483.5 MHz 2400 MHz – 2483.5 MHz
Bluetooth
®
transmitter power ≤ 15 dBm (EIRP) ≤ 15 dBm (EIRP) ≤ 15 dBm (EIRP)
Aux-In
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
2Vrms (0.35Vrms - 2Vrms);
4Vrms (0.7Vrms - 4Vrms);
6Vrms (1.05Vrms - 6Vrms):
(3.5 mm connector)
Aux-Out 2 Vrms (3.5 mm connector) 2 Vrms (3.5 mm connector) 2 Vrms (3.5 mm connector)
USB Drive File System FAT16, FAT32 FAT16, FAT32 FAT16, FAT32
USB Drive Maximum
Capacity
64GB 64GB 64GB
Loading ...
Loading ...