Loading ...
Loading ...
Loading ...
PlayingBackCDs
Tfiis unit has been designed to playback the following CDs:
Audio CD
CD-R (CD-Recordable)
CD-RW (CD-ReWritable)
MP3 disc (MP3 tiles recorded on a CD-R or CD-RW)*
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back when they are
already "finalized."
Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
Some CD-Rs or CD-RWs may not be played back on this
unit because of their disc characteristics, damage or stain
on them, or if the player's lens is dirty.
Important notices:
In general, you will have the best performance by keeping
your CDs and the mech_mism clean.
- Store CDs in their cases, and keep them in cabinets or on
shelves.
- Keep the unit's carrousel closed when not in use.
Continuous use of irregular shaped discs (heart-shape,
octagonal, etc.) can damage the disc rotating mechanism.
x@ x@
CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than for regular CDs.
*For MP3 discs
This unit manages tiles and folders on MP3 discs as
"tracks" and "albums."
Playback order of the MP3 files (tracks) recorded on a disc
are determined by the writing (or encoding) application;
therefore, playback order may be different from the one
you have intended while recording the tiles and the tk_lders.
Tfiis unit shows the tile (track) names and the ID3v 1/1.1
tags (only "Title" and "Artist") on the display after the tile
starts play; however, there is a limitation on available
characters and some tile names and ID3v 1/l. l tags are not
shown correctly.
_More about MP3 discs
MP3 discs (either CD-R or CD-RW) require a longer readout
time. (It varies due to the complexity of the recording
configuration.)
When making an MP3 disc, select ISO 9660 Level I or Level 2 as
the disc format,
This unit does not support multisession recording.
This unit can play MP3 files only with the following file
extensions ".MP3,"".Mp3,"".mP3," and ".rap3."
Non-MP3 files are ignored. If non-MP3 files are recorded together
with MP3 files, this unit will take a longer time to scan the disc. It
may also cause the unit to malfunction.
Some MP3 discs may not be played back because of their disc
characteristics or recording conditions.
LoadingCDs
1Press CD _. _°--"
The unit automatically turns on trod the L_!K._I
carrousel comes out.
\-
2 Place one or two discs correctly on the front
recesses of the disc tray, with its label side up.
CORRECT INCORRECT
When using a CD single (8 cm), place it on the inner
recess of the disc tray.
DISC
3 If you wish to load a third disc, press _'_
DISC CHANGE on the unit or DISC
SKIP on the remote control.
The disc tray rotates by 120 °.
4 Press CD A again.
The carrousel closes.
OD_
PlayingBackCDs--AII DiscandOneDisc
You can play all loaded CDs continuously--All Disc play, or
one selected disc--One Disc play.
All Disc play
On the unit ONLY:
1Load CDs.
If the current playing source is not the CD player, press
CD I_/11, then before going to the next step.
2 Press REPEAT repeatedly so that _
the ALL DISC indicator lights up '_-_
on the display.
\
For Audio CD:
I--TI
L!l
Total playing time,
_En]
Total Track number ALL DISC indicator
For MP3 disc:
MP3 indicator'"
i_tl N --I
I !!
woorr_l tlg
GROUP indicator appears when the MP3 playback mode is
the ALBUM mode. See also page 17.
13
Loading ...
Loading ...
Loading ...