90-141 SF-Series 111118
READ THIS PAGE FIRST
1. Howard-McCray would like to thank you for purchasing one
of our units.
PLEASE READ THIS MANUAL CAREFULLY BEFORE
PROCEEDING WITH THE INSTALLATION OR OPERATING OF
THIS UNIT.
2. Environment - These display cabinets are made to operate at
75°F and 55% relative humidity. Temperature and/or humidity
greater than the factory recommendations will hinder the
performance of this cabinet.
3. Cabinet Set-Up – A qualified refrigeration mechanic should
set-up this cabinet. Check control settings are extremely
critical to the proper operation of this unit. These settings
are the responsibility of the customer and are not covered by
factory warranties. Failure to have this unit installed by a
qualified refrigeration mechanic may VOID all the warranties
on this unit.
4. Location – This cabinet must not be located in the direct rays
of the sun or near radiant heat sources. A minimum of 3" of
free air space is required at the rear of the cabinet.
5. Never spray water into the cabinet. This will cause damage
to the seals.
6. If additional assistance is required, please call us at
1-800-344-8222.
READ THIS PAGE FIRST
Loading ...
Loading ...
Loading ...
