![](https://files.manualsfile.com/27612968-sf75-s-ff/bg1.png)
90-140 101018
READ THIS PAGE FIRST
1. Howard-McCray would like to thank you for purchasing
one of our units.
PLEASE READ THIS MANUAL CAREFULLY BEFORE
PROCEEDING WITH THE INSTALLATION OR OPERATING
OF THIS UNIT.
2. Environment - These display cabinets are made to operate
at 75°F and 55% relative humidity. Temperature and/or
humidity greater than the factory recommendations will
hinder the performance of this cabinet.
3. Cabinet Set-Up – A qualified refrigeration mechanic should
set-up this cabinet. Time clock and control settings are
extremely critical to the proper operation of this unit. These
settings are the responsibility of the customer and are not
covered by factory warranties. Failure to have this unit
installed by a qualified refrigeration mechanic may VOID all
the warranties on this unit.
4. Location – This cabinet must not be located in the direct
rays of the sun or near radiant heat sources. A minimum of
3" of free air space is required at the rear of the cabinet.
5. Never spray water into the cabinet. This will cause
damage to the seals.
6. If additional assistance is required, please call us at
1-800-344-8222.
READ THIS PAGE FIRST
Loading ...
Loading ...
Loading ...