Loading ...
Loading ...
Loading ...
CLEAN
For the first time, or the clean procedure has not been running for a long time, it is highly
recommended to run this procedure at first.
4. Before clean procedure, please make sure the water drain cap has been inserted into the appliance;
otherwise it will not work properly.
5. Press “ICE/CLEAN” button “ ” for 5 seconds, the screen displays 20M and the “CLEAN” symbol
“ ”(as shown in the figure below), it will run cleaning procedure for 20 minutes and automatically
exit, press this button again during the cleaning procedure, it will exit immediately.
6. After cleaning procedure, remove the top cover and the ice basket, rinse the main water reservoir
and the secondary water reservoir, then move the appliance to the edge of the desktop, make sure
that the appliance is placed steady, place a water container under the appliance,remove drain cap
from the bottom, dirty water will drain into the water container, then reinsert the drain cap.
Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If the unit
isn’t to be used, drain all water & dry the water reservoir.
How to obtain the ice-cube
Loading ...
Loading ...
Loading ...