Loading ...
Loading ...
Loading ...
PROBLEM
POSSIBLE CAUSE
SOLUTION
“” symbol is
lightening on and
the arrow flashes.
Lack of Water.
Stop the ice maker, fill water, and
press “ICE/CLEAN” button again
to restart the unit.
“ ” symbol is
lightening and
letter “F” flashes.
There is too much ice.
Suggest you to obtain the
ice-cube.
(No ice cube inside).
Remove the probable obstacle
inside or clean the inside wall of
the ice storage
Press “ICE/CLEAN” button for 5
seconds ，it will work for 80
minutes.
E1
Ambient temperature or water
temperature in inner tank is too high.
Please run the ice maker below
90 Fahrenheit degree ambient
and pour colder water into tank.
Refrigerant liquid leakage.
Press the ICE button twice, restart
ice making program, if this
problem show up again, verify
by a qualified technician.
Cover motor is broken
Pipe in the cooling system is
blocked.
Making Ice too
slowly
Hot Air outlet has been blocked by
something.
Hot Air outlet must be guaranteed
to have more than 15 CM of
ventilation distance.
Water temperature in inner tank is
too high.
Water temperature requirement
between 7℃-32℃.
Refrigeration system malfunctions.
Verify by a qualified technician.
Water leakage
Drain plug not in place
Put the drain plug in place.
Pipe Joint in the appliance may
Loose
Verify by a qualified technician.
The seal has reached service life
Verify by a qualified technician.
TROUBLESHOOTING
Loading ...
Loading ...