Loading ...
Loading ...
Loading ...
Monitor
6
Important Notes:
• Determine the best location for the camera (Keep in mind that you must
run the cable from the camera to the transmitter). You may need to drill a
small hole in the panel near your license plate (The camera is preferably
mounted just above the license plate).
• Be sure when running the connection cables to leave a small amount of
slack so you can still move the camera around the license plate, if you
decide to slightly adjust the camera's positioning at a later time.
• Connect the wire from the Camera into the Wireless transmitter.
• You can now test the camera, activate your car and turn the key into the
accessory position. Your connected monitor will automatically power on if
properly connected to a power source. Placing your vehicle in reverse
should provide a picture.
www.PyleUSA.com
Loading ...
Loading ...
Loading ...