Pyle PLCM4590WIR Wireless Backup Rear View Camera

User Manual - Page 5

For PLCM4590WIR.

PDF File Manual, 10 pages, Read Online | Download pdf file

PLCM4590WIR photo
Loading ...
Loading ...
Loading ...
4
Quick Installation:
1. The included 2.4Ghz wireless modules come in two parts, one is the
"Transmitter", the other is the "Receiver".
When installing the transmitter accessory cable -- it should connect to
the camera -- allowing the camera to transmit video.
When installing the receiver accessory cable -- it should connect to the
monitor -- allowing the screen to display video.
Important Note* When installing, be sure to properly identify the
Transmitter / Receiver.
2. The accessory Transmitter/Receiver cables feature power wiring
connections (some units feature 'loose' power cable wires with the ability
to be 'hard-wired' to your vehicle -- see the *Optional Hard-Wired
Installation description later in the user manual) -- otherwise, the vehicle
camera and monitor system features a direct plug-and-play connection
for system installation. Ensure proper power cable connection to allow
successful camera system video transmission/reception.
Video Connection (Video Transmitter / Video Receiver):
The yellow video connectors are used to transmit / receive the video
signals. Ensure proper video cable connection to allow successful camera
system video transmission/reception.
*Optional Hard-Wired Installation (Not available for all systems):
Camera (Transmitter):
If you decide to create a hard-wired system connection to your vehicle,
connect the transmitter's red wire of the DC 12V power cable, to the
positive 12V reverse tail light in the rear of your car. Then connect the black
wire of the DC 12V power cable and ground properly. The transmitter
should then be connected to the camera, and will supply power to the
camera directly.
www.PyleUSA.com
Loading ...
Loading ...
Loading ...