Loading ...
Loading ...
Loading ...
5
Monitor (Receiver):
If you decide to create a hard-wired system connection to your vehicle,
connect the receiver's red wire of the DC 12V power cable, to the positive
12V reverse tail light in the rear of your car. Then connect the black wire of
the DC 12V power cable and ground properly. The transmitter should then
be connected to the camera, and will supply power to the camera directly.
Installation Transcript:
Camera (Transmitter) Connection:
a. Connect the transmitter's RED power wire to your vehicle's reverse light
positive wire connection.
b. Connect the transmitter's BLACK power wire to your vehicle's reverse
light negative wire connection.
c. Connect the transmitter's power and video connectors to the camera.
d. Ensure the wires are safely and securely connected, with proper isolation
applied to all connections. Determine the best location to mount the
Wireless Transmitter Cable, as it is not waterproof and needs a safe and
secure location.
Monitor (Receiver) Connection:
a. Connect the receiver's RED power wire to your vehicle's reverse light
positive wire connection.
b. Connect the receiver's BLACK power wire to your vehicle's reverse light
negative wire connection.
c. Connect the receiver's video connector and power connector
(if necessary) to the monitor.
d. Ensure the wires are safely and securely connected, with proper isolation
applied to all connections. Determine the best location to mount the
Wireless Receiver Cable, as it is not waterproof and needs a safe and
secure location.
www.PyleUSA.com
Loading ...
Loading ...
Loading ...