1. Home
  2. Ancona
  3. Ancona AN-22125SS User Manual
  4. Page 17

Ancona AN-22125SS 2-piece Kitchen Appliance Package with 36" 6-burner Gas Cooktop & Wall Range Hood

User Manual and Installation Instructions - Page 17

For AN-22125SS. Also, The document are for others Ancona models: AN-2160, AN-2161, AN-2162, AN-2230SS, AN-2236SS, AN-2248SS, AN-2230WHT, AN-2236WHT, AN-2248WHT, AN-2230SSBK, AN-2236SSBK, AN-2248SSBK

PDF File Manual, 56 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
— 17 —
Maintenance
Replacing the Light Pucks
Cleaning Filters
IMPORTANT: Drain oil from baffles, spacers, filters, oil tunnels, oil containers before oil and residue overflow!
•Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.
•Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.
•Dry thoroughly before replacing and follow directions for installation in reverse.
•Filters should be cleaned after every 30 hours of use.
•Should lters wear out due to age and prolonged use, replace with a new lter.
u
Make sure the range hood is unplugged or turn OFF
breaker.
v
Use a screwdriver to pry the light out along the edge
of the lamp, then slightly pull out the LED light and
light connecting wire.
CAUTION: PUCK MAY BE HOT, PLEASE
TAKE OUT THE PUCK WHEN THE PUCK IS
COMPLETELY COOL!
w
Apply the reverse procedure to install the light back.
Replace with a 10.2 Volt, 2.5-Watt max, LED lights.
Plug in new puck and push back into light panel.
x
Turn ON breaker and range hood to test for
operation.
IMPORTANT:
ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION
ON THE APPLIANCE.
Loading ...
Loading ...
Loading ...