Loading ...
Loading ...
Loading ...
— 15 —
Operation
Lamp
Power
(On/off)
Increase
Auto Timer
Decrease
NOTE: When the hood has been initially connected to the
Power or after a Power Failure, all indicators turn ON for 1
second then OFF, the hood is in Standby condition.
Once the hood is connected with electricity, if wires for the control
are not well connected or control board has poor connection or
malfunction,buzzerwillemitSix Beeps. You must then disconnect
the hood from the Power, x the problem and reconnect the hood.
Lamps
(with 3 luminance setting + auto mode)
u
Press once:
Lamps turn ON with High luminance.
Indicators for are ON.
v
Press second time:
Lamps turn ON with Low luminance.
Indicators for are ON.
w
Press third time:
Lamps turn ON with Night-Light luminance.
Indicators for are ON.
x
Press fourth time:
Lamps will turn OFF.
Indicator for is OFF.
Cycle is: “High luminance - Low luminance -
Night-Light luminance - lamps OFF - High luminance …”
Auto Night-Light
y
Press once:
You will hear a "Long audible beep",
Lamps now work in Auto Night-Light mode.
Indicators for are ON.
U
Press second time:
You will hear a "Short audible beep",
Auto Night Light mode is disabled.
Indicator for is OFF.
NOTE: When light sensor detects the room is dark, lamps
will turn on to Night-Light luminance. When light sensor
detects the room is less dark, Night-Light will turn OFF
automatically. And cycle repeats again and again.
Power
u
Press once:
Fan starts to work at 1st-speed.
Indicators for are ON.
v
Press second time:
Fan will turn OFF, hood is in Standby condition.
All indicators are OFF.
Fan
(with 5 speed setting)
u
Press or once:
Fan starts to work at 1st-speed (minimum speed).
Indicators for are ON.
v
Press second / third / fourth time:
Fan will work at 2nd / 3rd / 4th-speed subsequently.
Indicators for are ON.
w
Press fifth time:
Fan will work at 5th-speed (maximum speed).
Indicators for are ON.
x
Press once:
Fan will work at 4th-speed.
Indicators for are ON.
y
Press second / third / fourth time:
Fan will work at 3rd / 2nd / 1st-speed subsequently.
Indicators for are ON.
U
Press fifth time:
Fan will turn OFF. Indicators are OFF.
Indicator is OFF (if lamps are OFF).
Timer
You can only activate the TIMER function when Fan is
working. TIMER will not function with only Lamps ON.
TIMER is xed for 3 minutes delay OFF.
u
Press once when Fan is working at any speed:
Fan will work continuously for 3 minutes, then Fan will
shut OFF automatically.
v
Press again before the end of 3 minutes, and
TIMER will be deactivated.
w
After activating the TIMER, if you change the FAN
speed, TIMER will be deactivated instantly.
IMPORTANT: When Lamps and/or Fan are working …
Pressing once will turn them OFF instantly!
Loading ...
Loading ...
Loading ...