Loading ...
Loading ...
Loading ...
36
Tracking Mode
Select Setting > Camera > Tracking Mode > Off, Manual Frame, Auto Frame, or Preset Framing.
Off: Tracking mode is disabled.
Manual Frame: User one-click SmartFrame button and camera will adjust view angle to fit all
participants in screen.
[Note] While in Auto Framing mode, or doing one-click manual frame, an icon message
( be
shown when using HDMI out) will display on the upper left screen to indicate that the framing
action is triggered. The icon will appear 2~3 sec on the screen. Once the framing process is done,
it will disappear. If you don’t want to see the icon display, please go to PTZApp 2, find “On Screen
Menu” function and select “Off”.
Auto Frame: AI lens (secondary lens) is with 95 degree panoramic view of the room to keep
detecting all participants or new participants and trigger PTZ lens to dynamically frame all
participants.
*The default framing speed is “Middle” speed. “High” speed is more suitable for one person
tracking.
Please note that the angle of AI lens is larger than PTZ camera. If people at two sides of meeting
room sit within AI lens view but out of PTZ lens’ widest angle, they won’t be framed and appear in
the view of PTZ lens successfully. When this situation happens, please come closer to make sure
people at two sides can be within PTZ camera’s viewing angle.
[Note] If camera cannot find people while zooming out to wide, it will go Preset 0.
Preset Framing: This is designed for requiring a specific zooming area with preferred image
proportion. Set up preset points in advance. (Only for Preset points 1~9 and Preset 0 is for
home position. The preset points must be within the AI lens angle of view.) Make sure the
preset areas are within AI lens’ view. When any of people enter a preset area, the PTZ camera
Lens 2: Panoramic view of the whole room
Lens 1: Showing the view after framing all people
Loading ...
Loading ...
Loading ...