Loading ...
Loading ...
Loading ...
1
2
10
3
4
6
5
7
8
9
13
11
12
14
10.9 Door Reversibility
Before connecting the appliance to the power supply you should check, whether the door
swing must changed from left (as delivered) to right, if this is required by the installation
location and the usability.
1. Provide necessary tool.
2. Unplug the appliance.
3. Remove hinge hole cover and hinge cover.
4. Unplug the connection cable.
5. Removes screws and hinge
6. Remove cover on door. Remove axe cover on
door
7. Open and remove the door.
8. Turn the door upside down, remove 2 screws on
the bottom of the door. Remove 2 screws, door
stopper and axe cover on the bottom of the door
9. Take door stopper from last step and the thinner
screws. Fix 2 screws also on the other side of the
door.
10. Tilt slightly backwards the cabinet, remove 4
screws and then the lower hinge.
Assembly steps (Fig. 10.9):
10.9
11. Remove screw and axe cover. Remove hinge axe
12. Take the thicker axe cover from the accessory
bag. Fix it with screw from last step.
13. Fix the hinge to the opposite position of the cabinet
with 4 screws.
14. On opposit side of the door, pull out left side
connection cable and put it through the axe
cover from step 5, mount axe cover. Mount the
hole cover on the right side.
25
EN
10 - Installation
Loading ...
Loading ...
Loading ...