Loading ...
Loading ...
Loading ...
▶ Remove all packaging materials, keep them out of children reach and dispose them
in an environmentally friendly manner.
▶ Clean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
▶ After the appliance has been levelled and cleaned, wait for at least 6 hours before
connecting it to the power supply. See Section INSTALLATION.
▶ Precool the compartment for 2 hours at high settings before loading with food. To
do so, please set the temperature to -20 °C or -24 °C.
The appliance is in operation as soon as it is connected to the power supply.
▶ The freezer temperature is automatically set to -18 °C. This is the recommended
setting and the ideal temperature for frozen goods. If desired, you can change the
temperatures manually. Please see ADJUSTING THE TEMPERATURE.
after 30 seconds. The panel lock might be active.
Notice: Presettings
▶ The appliance is preset to the recommended temperature of -18 °C. Under normal
ambient condition you don´t need to set a temperature.
▶ When the appliance is switched on after being disconnected from the main power
supply, it may take up to 12 hours for the correct temperature to be reached.
5.3 Standby-mode of display
operation. The display locks automatically. It lights up automatically when touching any but-
ton or opening the door.
5.4 Display lock and unlock
Automatic locking
The display panel can automatically enter the lock mode. The display panel is automatica-
lly locked after 30 seconds without operation.
Manual lock
When the display panel is unlocked, press the ‘Lock’ key(D) for 3 seconds. After a ‘beep’,
the ‘Lock’ (D) indicator lights up, then the display panel enters the lock mode. When the
display panel is locked, press the ‘Lock’(D) for 3 seconds. After a ‘beep’, ‘Lock’(D) indicator
is off. Display panel is unlocked.
5 - Use
EN
14
Loading ...
Loading ...
Loading ...