Samsung DVE45B6305C/AC User Manual

Loading ...

English

Installation

English30

STEP 4 Connect the water hose

The dryer must be connected to a cold water tap using the provided water hoses.

1. Close the cold water tap. If you have a washer’s cold

water hose attached to the cold water tap, unscrew

and remove the hose. Then, connect the female end

of the Y-connector to the cold water tap.

2. Connect the straight end of the water hose to the

Y-connector. Tighten the hose coupling by hand.

3. Using pliers, tighten the coupling an additional two-

thirds turn. Do not overtighten. You can damage the

coupling.

4. Connect the angled end of the water hose to the

filling valve at the bottom rear of the dryer. Turn the

coupling by hand until it is tight.

5. Using pliers, tighten the coupling an additional two-

thirds turn. Do not overtighten. You can damage the

coupling.

6. If you detached the cold water hose from your

washer, attach the hose to the open end of the

Y-connector, tighten the coupling by hand until it is

tight, and then, using a pliers, tighten an additional

two-thirds turn.

7. Open the cold water tap, and then check for any

leaks.

If the Y-connector cannot be directly connected to the cold water tap, use the short hose. See the “Using

the short hose as an extension” section on page 31.

Untitled-19 30 2022-09-05  2:49:43

Loading ...

Samsung DVE45B6305C/AC - 7.5 Cu.ft Dryer With Multi Steam And Steam Sanitize