Loading ...
Loading ...
Loading ...
5
ADJUSTMENTS
OPERATING PROCEDURES
Inserting and Removing the Battery Pack
a) Insert the battery pack into the grip until it clicks in place.
b) To remove the battery pack, depress the lock buttons simultaneously and pull
the pack out of the machine.
LED INDICATOR:
LED Red on=Low battery
LED Red flashing=The nails/staples are jammed.
LED Green on=No nails, power tool in dry fire protection
LED Green flashing=Overheat,power tool in overheat protection (The tool can not
fire in this situation,return to work after it has cooled down)
ADJUSTMENTS
OPERATING PROCEDURES
LED Lighting
Led lighting can be turned on when the machine is working, or press the led
work light switch.
Checking the contact trip mechanism
Remove all staples or nails from the magazine.
Press the safety nose/contact pin and pull the trigger. The safety nose/contact
pin and the trigger should move freely.
Reload the staples or nails to the magazine.
Do not use the tool if the safety nose/contact pin cannot move freely.
Place the contact pin on the workpiece and press the machine without pulling
the trigger, the machine should not fire. Lift the machine off the workpiece, the
contact pin should spring back automatically. Pull the trigger, the machine should
not fire.
Inserting Staples or Nails into the magazine （See FIG 1,FIG 2)
NOTE: The number of staples or nails left in the magazine can be read using
the viewing window.
1 . Remove battery pack from the tool.
2 . Press the release button and pull out the magazine cover.
3 . Tilt the tool (approximately 45° Angle) and place nails/staples into the track of
the magazine channel.
Make sure that the fasteners are placed correctly:
Staples are placed against the profiled side of the rail, the crown of the
staple is in the topmost part of the magazine(legs are facing away from the
body of the tool).
Nails are placed against the profiled side of the rail, with the points of the nails
facing downwards, the leg of the nail is in the bottom of the magazine.
4 . Close the magazine cover until it engages with the release button.
5. Reattach battery pack to tool.
Warning: Do not place fasteners of different length. Do not place staples and
nails mixed together.
B. Loading nails
A．Loading staples
!
Fig.1
Fig.2
45°
45°
Loading ...
Loading ...
Loading ...