Loading ...
Loading ...
Loading ...
Turn each Water Tank upside
down one at a time and remove
the Tank Caps by turning them
counter clockwise.
Remove Extension Nozzle and
Dual Directional Mist Nozzle
from the Left Water Tank prior
to lling the Water Tanks.
1
Lift the Left Water Tank with
both hands using the Handle
to remove the humidier from
the Base. Note: The Left Water
Tank has the Nozzle Opening on
the top of the tank. Repeat with
the Right Water Tank.
2 3
4
Replace the Tank Caps on
both Water Tanks by rmly
turning clockwise until tight.
Turn each Water Tank upright
and check the Tank Caps
for leaks. If any water drips,
remove the Tank Cap and
retighten.
WARNING: DO
NOT place Water Tanks on the
humidier Base if the caps are
leaking.
5
6
Filling The Water Tanks
WARNING: Always unplug the unit before removing the Water Tanks.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tanks from the top of the unit. Follow Water Tank
lling instructions in #4.
WARNING: NEVER operate WITHOUT water in at least one of the tanks. NOTE: If
water runs out of one tank the unit will still continue to run until both tanks are empty.
4
Filling the Water Tanks:
Use clean, cool, tap water.
WARNING: DO NOT
use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING:
NEVER ll with
hot/warm water or use additives
as this could damage the unit and
void the warranty.
WARNING:
If you have hard tap water STOP
using tap water and use ONLY
ltered, distilled, cold boiled or
bottled water.
Attach the Dual Directional Mist Nozzle or Extension Nozzle & Dual
Directional Mist Nozzle together to the top of the Left Water Tank.
Make sure to align the notches on the Extension Nozzle and Nozzle
Opening when using the Extension Nozzle feature. To easily control
the direction of the mist simply separate the Dual Directional Mist
Nozzle and position as desired-see photo.
Lift the Left Water Tank with
both hands using the Handle
and replace on the left side
of the humidier base. Note:
The Left Water Tank has the
Nozzle Opening on the top of
the tank. Make sure to follow
the shape of the Water Tank
and the humidier Base so
that the Tank sits level and
ush to the Base. Repeat
with the Right Water Tank.
Ensure the tanks are rmly
seated.
WARNING: DO
NOT force the Water Tanks
onto the Base. If they DO
NOT sit properly remove and
follow the steps above.
7
Loading ...
Loading ...
Loading ...