IM0036B
READ AND SAVE THESE INSTRUCTIONS
nished size 5.5” wide x 8.5” high
CLEAN MIST
™
DUAL TANK SMART HUMIDIFIER
™
TABLETOP & FLOOR STANDING WITH REMOTE CONTROL
Instruction Manual and Warranty Information
Contents
Safety Instructions ............................................................................................................. 1
Unpacking / Specications ............................................................................................... 2
Parts & Contents ............................................................................................................... 3
Filling The Water Tank ....................................................................................................... 4
Operating Instructions ....................................................................................................... 5
Weekly Cleaning & Care / Storage .................................................................................... 6
Troubleshooting ................................................................................................................. 7
Other Great Products ........................................................................................................ 8
Warranty ............................................................................................................................ 9
If you have a respiratory condition, please contact your physician prior to use.
FCC STATEMENT
Potential for Radio/Television interference
This device complies with Part 18 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 18 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that the interference will not occur in a particular installation. If the product does cause harmful interference to
radio or television reception, which can be determined by turning the product on or off, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
SAFETY INSTRUCTIONS
1
Battery Disposal:
WARNING: DO NOT
dispose of batteries in re. Improper handling/disposal of
batteries may cause batteries to explode or leak. Please dispose of batteries responsibly
by throwing away batteries in a proper trash receptacle per township ordinance.
Prior to using the appliance, read through the instructions for complete use and
keep in a safe place for later reference.
•
WARNING: DO NOT use outdoors. Only use as intended and described
in this manual.
•
WARNING: DO NOT expose or immerse the Base in water or other liquids.
• Before using the appliance, extend the cord and inspect for any signs of
damage.
WARNING: DO NOT use if cord has been damaged.
•
WARNING: Keep cord away from heated surfaces and out of the way,
where it cannot be stepped on or tripped over.
•
WARNING: This appliance has a polarized plug (one blade is wider than the other)
as a safety feature. If the plug does not t fully into the outlet, reverse the plug.
If it still doesn’t t, contact a qualied electrician.
WARNING: DO NOT attempt
to defeat this safety feature.
•
WARNING: ALWAYS place humidier on an elevated rm, at, level surface
where it’s not easily knocked over. (e.g. on a table, chest, cabinet, etc).
•
WARNING: DO NOT place the appliance directly on the carpet, next to a heating
vent, under direct sunlight, high temperature areas, near computers or sensitive
electronic equipment.
•
WARNING: DO NOT place the appliance directly on wood furniture or other
surfaces which could get damaged by water.
•
WARNING: NEVER use in an environment where explosive gases are present.
•
WARNING: DO NOT use any attachments not provided with the unit.
•
WARNING: NEVER use the appliance after a malfunction, after it has been
dropped or damaged in any other way.
• Only operate when fully assembled.
• Keep out of reach of children. Close supervision is necessary when this
appliance is used by or near children, elderly or disabled persons.
•
WARNING: NEVER drop or insert any object into any opening.
•
WARNING: DO NOT block any air outlets or intakes.
•
WARNING: NEVER cover the appliance when it’s in operation.
•
WARNING: To unplug turn controls to the “OFF” position, then remove the plug
from the outlet. Ensure your hands are dry.
•
WARNING: ALWAYS unplug and EMPTY the Water Tanks when not in use for a
long period of time.
•
WARNING: ALWAYS turn off or unplug before removing, lling or emptying
the Water Tanks.
•
WARNING: DO NOT wash, adjust or move without rst unplugging the unit.
•
WARNING: DO NOT touch the water or any other part in the Base
during operation.
•
WARNING: NEVER operate WITHOUT water in at least one of the tanks.
NOTE: If water runs out of one tank the unit will still continue to run until both tanks
are empty.
•
WARNING: DO NOT use hot water in the tanks.
•
WARNING: ONLY use water in the tanks, NEVER use any additive such as
essential oils, eucalyptus, water conditioners, etc… in the water.
•
WARNING: DO NOT move appliance with water inside the tanks. In this case
remove the Water Tanks and empty the Water Reservoir prior to moving.
•
WARNING: DO NOT attempt to repair or adjust the unit. Servicing must be
performed by professional or qualied personnel.
•
WARNING: Discontinue use if unit makes loud noises or has a strange smell.
• Perform regular maintenance of the Ultrasonic Nebulizer.
•
WARNING: DO NOT direct the mist against a wall or other home appliance.
•
WARNING: DO NOT pour water into the Base through Air Outlet during
cleaning and lling.
•
WARNING: DO NOT rinse Base under faucet.
•
WARNING: DO NOT immerse the Base in water.
•
WARNING: NEVER scrape the Ultrasonic Nebulizer with a hard or sharp object.
No More Dry Air
Thank you for choosing the Air Innovations
®
– Clean Mist™ Dual Tank Smart Humidier™
Tabletop & Floor Standing with Remote Control and congratulations on taking this impor-
tant step in improving the quality of air in your home or ofce.
The Air Innovations
®
– Clean Mist™ Dual Tank Smart Humidier™ Tabletop & Floor
Standing with Remote Control uses Ultrasonic Technology to create humidity instantane-
ously, while working silently to erase the discomforts of dry air.
Unpacking
Specications
Product Model Power Consumption Rating Voltage Tank Capacity Dimensions Weight
MH-801B 30W 110-120V~60Hz
*Follow directions to ll and operate the humidier.
2
Remove the Remote Control
and Dual Directional Mist
Nozzle from the top of the
packaging.
Remove the plastic bag
from the humidier.
Carefully remove the Extension
Nozzle and humidier from the
box by pulling the Base of the
unit (Do not take the unit out
of the box by pulling the tanks).
1
2
3
8.15L / 2.15 Gallon
L10.25” X W10.25”
X H30.62”
5.2 Lbs.
1. Dual Directional Mist Nozzle
2. Extension Nozzle
3. Handles
4. Left Water Tank
a. Nozzle Opening
5. Right Water Tank
6. Base
7. Control Panel
8. Remote Control
(requires (1) 3V Lithium Battery included)
9. Air Outlet
10. Water Sensor
11. Ultrasonic Nebulizer
12. Water Reservoir
13. Cleaning Brush
14. Ceramic Filters
15. Tank Caps
3
Parts & Contents
2
4
3
5
6
1
7
3
9
10
11
12
13
15
14
15
4a
8
Turn each Water Tank upside
down one at a time and remove
the Tank Caps by turning them
counter clockwise.
Remove Extension Nozzle and
Dual Directional Mist Nozzle
from the Left Water Tank prior
to lling the Water Tanks.
1
Lift the Left Water Tank with
both hands using the Handle
to remove the humidier from
the Base. Note: The Left Water
Tank has the Nozzle Opening on
the top of the tank. Repeat with
the Right Water Tank.
2 3
4
Replace the Tank Caps on
both Water Tanks by rmly
turning clockwise until tight.
Turn each Water Tank upright
and check the Tank Caps
for leaks. If any water drips,
remove the Tank Cap and
retighten.
WARNING: DO
NOT place Water Tanks on the
humidier Base if the caps are
leaking.
5
6
Filling The Water Tanks
WARNING: Always unplug the unit before removing the Water Tanks.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER ll the Water Tanks from the top of the unit. Follow Water Tank
lling instructions in #4.
WARNING: NEVER operate WITHOUT water in at least one of the tanks. NOTE: If
water runs out of one tank the unit will still continue to run until both tanks are empty.
4
Filling the Water Tanks:
Use clean, cool, tap water.
WARNING: DO NOT
use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING:
NEVER ll with
hot/warm water or use additives
as this could damage the unit and
void the warranty.
WARNING:
If you have hard tap water STOP
using tap water and use ONLY
ltered, distilled, cold boiled or
bottled water.
Attach the Dual Directional Mist Nozzle or Extension Nozzle & Dual
Directional Mist Nozzle together to the top of the Left Water Tank.
Make sure to align the notches on the Extension Nozzle and Nozzle
Opening when using the Extension Nozzle feature. To easily control
the direction of the mist simply separate the Dual Directional Mist
Nozzle and position as desired-see photo.
Lift the Left Water Tank with
both hands using the Handle
and replace on the left side
of the humidier base. Note:
The Left Water Tank has the
Nozzle Opening on the top of
the tank. Make sure to follow
the shape of the Water Tank
and the humidier Base so
that the Tank sits level and
ush to the Base. Repeat
with the Right Water Tank.
Ensure the tanks are rmly
seated.
WARNING: DO
NOT force the Water Tanks
onto the Base. If they DO
NOT sit properly remove and
follow the steps above.
7
ON/OFF – Plug in to a standard (120V AC) electrical outlet. The LED Display will turn
on for 2 seconds then turn OFF. Press the ON/OFF button once and the “Operating”
indicator will turn ON. Mist may not appear immediately; allow up to 15 minutes for the
water in the tanks to transfer to the base.
Mist Output
–
When you turn the unit ON, it will default to the lowest mist setting. Press-
ing the “Mist” button will increase the output. Press once for Medium, twice for High, three
times for Supreme, four times for the Turbo Setting. Pressing the Mist button a fth time
will bring the unit back to Low
. NOTE: Turbo setting is intended for those wanting a
more powerful mist and works best while the Extension Nozzle is being used. The
Turbo setting will operate for 40 minutes and will then go to the Supreme Mist
Setting. User must wait 20 minutes before Turbo setting can be used again.
1
2
3
6
7
8
4
5
5
Operating Instructions
WARNING: DO NOT operate the humidier without water in at least one of the tanks.
WARNING: NEVER lift the tanks OFF the Base while the unit is operating.
The Delay Start and Auto-Off buttons allow you to set the humidier to turn
ON and OFF automatically as desired.
Delay Start – The Delay Start feature allows you to program the unit to turn ON
automatically. To use, press the “Delay Start” button once; you will see “Delay
Start” 01:00H illuminated on the display. This feature works in 1 hour
increments and is programmable up to 24 hours. Simply keep pressing the Delay
Start button until you get to your desired delay start time, once you have reached
the time the display will ash three times and then will start to countdown until
the unit turns ON.
Auto-Off – The Auto-Off feature allows you to run the humidier now and set it
to turn OFF at a specic time automatically (in 1 hour increments from 1-24 hours).
To use - press the “Auto-Off’ button once; you will see “Auto-Off” 01:00H illuminated
on the display. This feature works in 1 hour increments and is programmable up to 24
hours. Simply keep pressing the Auto-Off button until you get to your desired Auto-
Off time, once you have reached the time the display will ash three times and then
start to count down until the unit turns OFF. The display will start alternating
between the current ambient humidity and the Auto-Off Timer. NOTE: You can use
the Delay Start and Auto-Off functions together on this fully programmable LED
Display to program the humidier to turn ON and turn OFF at your desired times.
Humidistat – By using this feature the humidier will automatically monitor and
control the humidity level according to your desired setting. Once the desired humidity
level is reached the mist will shut OFF until the humidity drops below the setting and
then the mist will turn back ON automatically to maintain the humidity level desired. To
set this feature press the “Humidistat” button to your desired setting. Settings range
from 40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative
Humidity is recommended. Once you set your desired humidity, the number will ash
three times and then the display will revert back to the Relative Humidity. To view the
set humidity level, press the Humidistat button once.
Beep/Dim – The humidier automatically defaults to an audible beep when
changing settings, the waterless indicator will illuminate and you will hear three beeps
when the humidier is out of water and the LED Display will be illuminated.To disable
one or more of these settings, follow the steps below: Press Beep/Dim once to disable all
sound (Beep Off will ash on the display three times and then will remain on the display
to indicate the sound is OFF). Press the button twice to turn the LED Display OFF (sound will
remain OFF) and press a third time to enable the LED Display and the sound (default function).
LOW Water – When the tanks are out of water
the “waterless” indicator will appear in the display,
you will hear three beeps and the automatic safety
shut-off will turn the Ultrasonic Nebulizer & unit
OFF. Note: You can disable the audible beep by
pressing the Beep/Dim button once. To re-enable,
press the Beep/Dim button two more times.
Extension Nozzle – To convert this unit from a Tabletop unit to Floor unit simply
remove the Dual Directional Mist Nozzle from the top of the Left Water Tank. Place
the unit on your desired oor area and insert the Extension Nozzle into the Top of the
Left Water Tank. Then place the Dual Directional Nozzle on the top of the Extension
Nozzle.
WARNING:
Be sure the unit is unplugged and turned OFF when
changing the Nozzles.
Remote Control –
Be sure to remove the clear
pull tab before using the
remote.
The functions on the Remote
Control mirror those on the
humidier from Low to Supreme.
When using the Remote Control,
you can control the humidier
from your desired location.
NOTE: The Turbo function cannot
be controlled by the Remote. In
order to operate the Turbo setting
it must be controlled manually
on the unit.
a
e
b
d
c
6
Weekly Cleaning & Care
WARNING: Before cleaning always turn power OFF and unplug the unit from outlet.
WARNING: DO NOT rinse Base under faucet. To clean, wipe the Base with a paper towel.
WARNING: DO NOT use any solvents or aggressive cleaning agents. Keep water away
from the Air Outlet.
WARNING: DO NOT tamper with the Water Sensor.
About White Dust -Use of high-mineral content water may cause a white mineral residue to
accumulate on room surfaces near the humidier. The mineral residue is commonly referred to as
“White Dust”. The higher the mineral content (the harder your water is), the greater the potential for
White Dust. The White Dust is not caused by a defect in the humidier, but is due only to minerals
suspended in the water from your tap.
WARNING: If you have hard tap water STOP using tap
water and use ONLY ltered, distilled, cold boiled or bottled water to minimize the White Dust
residue.
Tank Cleaning - Remove the Directional Mist Nozzle from the top of the Left Water Tank then
remove the Water Tanks from the unit. Turn each tank upside down, unscrew the Tank Cap and
drain any water from the tanks. Wipe the tanks with a soft damp cloth then rinse it with warm
water inside and out.
Base Cleaning - Gently wipe the Base with a soft damp cloth.
White Dust Cleaning - If mineral deposits
“White Dust” are evident around the Ultrasonic
Nebulizer and Water Sensor, clean these surfaces
with a soft cloth and a small amount of undiluted
white vinegar. If necessary, mix a solution of 50%
white vinegar and 50% water and ll the Base with
enough solution to cover the Ultrasonic Nebulizer (a).
Allow it to soak for an hour and then use the provided
brush to gently loosen buildup on the Ultrasonic
Nebulizer (b). Put 1 cup of water in the Base and
wipe clean with a soft cloth.
WARNING: DO NOT
rinse Base under faucet.
Ceramic Water Filter Cleaning - Remove the
Water Tanks from the humidier Base. Remove the
Tank Cap (c) and rinse Ceramic Filter thoroughly with
tap water (d), then replace on Water Tanks.
Surface Cleaning - Clean all surfaces of the unit with
a clean damp soft cloth.
WARNING: When emptying the Water Reservoir on
the Base, make sure that the water is poured away from
the Air Outlet (e). If water is poured into the outlet it
may damage the humidier.
1. Follow all cleaning instructions prior to storage.
2. Dry all parts, including the inside of the Water Tanks.
WARNING: NEVER
leave water inside the tanks for several days.
3. Leave the Tank Caps partially loosened to prolong the life
of the caps.
4. Preferably store in its original box, in a dry place away from
high temperatures.
5. Follow all cleaning instructions after long periods of storage.
Storage
f g h
Replacing The Remote Control Battery - Push the tab to the left of the
battery tray towards the right to unlock the tray. (f) While the the tab is pushed,
pull out the battery tray. (g) Remove the battery from the tray and replace it with
a new 3 volt lithium battery (CR2025) with the positive side facing up. (h) Insert
the tray back into the bottom of the remote contol until it locks in. (i)
i
Troubleshooting
7
PROBLEM: Power Light is OFF
POSSIBLE CAUSES
a. Unit is not plugged in
b. No power at outlet
POSSIBLE SOLUTIONS
a. Plug in power cable
b. Check circuits, fuses, or try a different outlet
PROBLEM: Weak or No mist output
POSSIBLE CAUSES
a. No water in at least one of tanks
b. Unit is not level
c. White Dust on Ultrasonic Nebulizer
and/or Water Sensor
d. Blower not operating
e. Water temperature is too low
f. Ultrasonic Nebulizer is not operating
POSSIBLE SOLUTIONS
a. Fill at least one of the tanks with water and
wait 10 – 15 minutes
b. Place unit on level surface
c. Clean humidier per instructions
d. Ensure there is enough water in Base
to activate Water Sensor
e. Set output to High and wait for
10 – 15 minutes
f. See Warranty
PROBLEM: Peculiar Odor
POSSIBLE CAUSES
a. If new unit
b. Dirty Water Tanks or old water in tanks
c. Minerals in well water or hard water
POSSIBLE SOLUTIONS
a. Gently wipe the Base with a soft damp cloth
b. Empty old water and clean Water Tanks per
instructions
c. Use ltered, distilled, cold boiled or bottled water
PROBLEM: White Dust on unit or nearby furniture
POSSIBLE CAUSE
a. Hard water used
POSSIBLE SOLUTION
a. Use ltered, distilled, cold boiled or bottled water
PROBLEM: Condensation forms
around humidier or windows
POSSIBLE CAUSES
a. Mist output is set too high for the room size
b. Direction of Directional Mist Nozzle
POSSIBLE SOLUTIONS
a. Decrease the mist output
b. Change direction of the Directional Mist Nozzle
PROBLEM: Water is leaking
POSSIBLE CAUSES
a. Tank Caps are not properly attached
b. Water Tanks are not properly seated
c. Unit is not on level surface
POSSIBLE SOLUTIONS
a. Follow #5 on page 4 “Filling the Water Tanks”
b. Follow #6 on page 4 “Filling the Water Tanks”
c. Place on level surface
PROBLEM: Remote Control does not work
POSSIBLE CAUSES
a. Battery may be low or needs to be replaced
POSSIBLE SOLUTIONS
a. Replace battery
8
Try These Other Great
Products For Your Life!
Available at: www.qvc.com & www.forlifeproducts.com
Ultrasonic Humidiers
Air Puriers
1-YEAR WARRANTY -
MH-801B
Air Innovations
®
Clean Mist™ Dual Tank Smart Humidier™ Tabletop & Floor Standing with
Remote Control comes with a 1-year manufacturer’s warranty. If this unit should become
defective within 1-year from the date of purchase, or if you have any questions or
comments or regarding replacements for any of our products, please contact us directly at:
Call us toll free at: 844-600-1370
Monday thru Friday 8:30 AM to 5:00 PM EST.
Visit us on the web at: www.GreatInnovations.tv
e-mail us: info@greatinnovations.tv
Or write us:
Great Innovations, LLC
Att: Quality Assurance Dept.
2301 SW 145
th
Ave.
Miramar, FL. 33027 USA
Please ll out the warranty card and
mail back to the above address.
Or, register your warranty online today.
Simply go to:
http://www.greatinnovations.tv/warranty.php
NAME
ADDRESS
CITY
STATE ZIP
TELEPHONE
E-MAIL
DATE OF PURCHASE
PLACE OF PURCHASE
THIS UNIT COMES WITH A 1-YEAR WARRANTY SUBJECT TO THE FOLLOWING CONDITIONS:
In the rst year, all repairs will be performed free of charge or the unit will be replaced. This
warranty is not transferable, it is valid only for the original purchaser. This warranty will be
voided if the unit is subjected to unauthorized repair or impact damage. If you have any
questions please call toll free: 844-600-1370
Please check here if you would not like to receive any solicitations from our company
9
!
Air Innovations
®
©2015 Great Innovations, LLC. All Rights Reserved. US & International Patents Pending.
Available In A Variety Of Colors
