Loading ...
Loading ...
Loading ...
26| TROUBLE SHOOTING GUIDE
XII. TROUBLE SHOOTING GUIDE
Code Reason Solution
E01 Software runs overload Turn off the switch and restart the
machine.
No. Description Specs Qty
63 Screw M6*60 3
64 Lock Washer M6 3
65 Screw M8*45 6
66 Lock Washer 10 2
67 Lock Washer 8 14
68 Standard Spring Washer 5 2
69 Lock Washer 5 2
70 Standard Spring Washer 6 4
71 Lock Washer 6 4
72 Screw ST4.2*19 2
73 Screw ST4.2*12 13
74 Screw M5*10 4
75 Screw 4.2*19 2
No. Description Specs Qty
76
Screw
4.2*12 6
77
Screw
4.2*13 25
78
Screw
4.2*12 11
79
Screw
4.2*9 4
80
Screw
2.9*8 2
81
Drive Belt
1
82
Motor Fixing Plate
2
83
Reinforced Rod
Cushion
4
84
Elastic Cushion
4
85
Cushion 1
2
86 Screw M6 4
87 Screw M6*40 4
E02 Hardware is overloaded Turn off the switch and restart the
machine.
E03 IPM module is overheated due
to overload.
Shut down the machine 30 minutes,
then restart the machine.
E04 1. Input voltage is too low
2. Control board is damaged
1. Check if the power supply voltage is
normal.
2. If input voltage is normal, please
replace the lower control.
E05 1. Input voltage is too high
2. Control board is damaged
1. Check if the power supply voltage is
normal.
2. If input voltage is normal, please
replace the lower control.
Loading ...
Loading ...
Loading ...