Loading ...
Loading ...
Loading ...
8
How to Connect the C22
How to Connect the C22
The C22 has the ability to automatically switch power
On/Off to McIntosh Source Components via the
Power Control connections. The Data Port Connec-
tions allow for the remote operation of basic functions
using the C22 Remote Control.
The connection instructions below, together with
the C22 Input and Output Connection Diagrams lo-
cated on the separate folded sheet “Mc1A/1B”, are an
example of a typical audio system. Your system may
vary from this, however the actual components would
be connected in a similar manner. For additional in-
formation refer to “Connector and Cable Information”
on page 3.
Power Control Connections:
1. Connect a Control Cable from the C22 POWER
CONTROL MAIN (upper) Jack to the Turntable
Power Control In Jack.
2. Connect a Control Cable from the Turntable Power
Control Out Jack to the Music Server PWR CTRL
(Power Control) In Jack.
3. Connect a Control Cable from the Music Server
PWR CTRL (Power Control) Out Jack to the
SACD/CD Player Power Control Remote In Jack.
4. Connect a Control Cable from the SACD/CD
Player Power Control Remote Out Jack to the AM/
FM Tuner Control In Jack.
5. Connect a Control Cable from the C22 POWER
CONTROL OUT 1 Jack to the Stereo Power Am-
plifier (Main Room) Power Control In Jack.
6. Optionally, connect a Control Cable from the
Power Amplifier (Main Room) Power Control
Out Jack to the Left Channel Loudspeaker Power
Control In Jack.
7. Optionally, connect a Control Cable from the Left
Channel Loudspeaker Power Control Out Jack to
the Right Channel Loudspeaker Power Control In
Jack.
8. Connect a Control Cable from the C22 POWER
CONTROL OUT 2 Jack to the Stereo Power Am-
plifier (Secondary Room) Power Control In Jack.
9. Optionally, connect a Control Cable from the
Power Amplifier (Secondary Room) Power Control
Out Jack to the Left Channel Loudspeaker Power
Control In Jack.
10. Optionally, connect a Control Cable from the Left
Channel Loudspeaker Power Control Out Jack to
the Right Channel Loudspeaker Power Control In
Jack.
11. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 1 thru 4.
Data Control Connections:
12. Connect a Control Cable from the C22 LINE 1
DATA PORTS Jack to the AM/FM Tuner Data In
Jack.
13. Connect a Control Cable from the C22 BALance
1 DATA PORT Jack to the SACD/CD Player Data
In Jack.
14. Connect a Control Cable from the C22 LINE 2
DATA PORT Jack to the Music Streamer Data In
Jack.
15. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 12 thru 14.
Audio Connections:
16. Connect an Audio Cable from the C22 LINE 1
INPUT Jacks to the AM/FM Tuner UNBALanced
Output Connectors.
17. Connect Balanced Cables from the C22 BALanced
1 INPUT Jacks to the SACD/CD Player Balanced
Output Connectors.
Note: Unbalanced Audio Cables may be used to con-
nect to a C22 Unbalanced Input instead of the
Balanced Input.
18. Connect an Audio Cable from the C22 LINE 2
INPUT Jacks to the Music Streamer Unbalanced
Output Jacks.
19. Connect the Audio Cables coming from the Turn-
table to the C22 MC PHONO L and R INPUT
Jacks.
Note: If the Turntable has a Moving Magnet Car-
tridge, connect the audio cables to the C22
MM PHONO L and R INPUT Jacks instead of
the MC Input.
20. Connect any additional McIntosh Components in a
similar manner, as outlined in steps 16 thru 19.
21. Connect Balanced Cables from the C22 OUTPUTS
1 L and R Connectors Jacks to the Power Ampli-
fier (Main Room) Balanced Input Jacks.
Note: Unbalanced Audio Cables may be used to
connect to C22 Unbalanced Output 1 Jacks
instead of the Balanced Output Connectors.
22. Optionally, connect Balanced Audio Cables from
the C22 OUTPUT 2 L and R Connectors to the
McIntosh Power Amplifier (Secondary Room) Bal-
anced Input Jacks.
Note: Unbalanced Audio Cables may be used to
connect to C22 Unbalanced Output 2 Jacks
instead of the Balanced Output Connectors.
Ground Connections:
23. Connect the Ground Cable coming from the Turn-
table to the C22 GND Binding Post.
AC Power Cords Connections:
24. Connect the C22 AC Power Cord to a live AC
outlet as illustrated.
Loading ...
Loading ...
Loading ...