Loading ...
Loading ...
Loading ...
7
Connect the C22 power cord to a live
AC outlet. Refer to information on the
back panel of your C22 to determine
the correct voltage for your unit
POWER CONTROL MAIN Outputs send
Turn-On Signals to McIntosh Components
when the C22 is switched On
DATA PORTS send signals to Mc-
Intosh Source Components to allow
control with the C22 Remote Control
INPUTS BALanced 1 and 2 accept
high level program source signals
PHONO MM accepts
signals from a Moving
Magnet phono cartridge
INPUTS (unbalanced)
accept high level program
source Audio Signals
OUTPUTS unbalanced 1 and 2 send
Audio Signals to a Power Amplifier
and are controlled by the C22 Front
Panel OUTPUT 1 and 2 Switches
OUTput 1 and OUTput 2 send Turn-On Signals to
McIntosh components and are controlled by the
C22 Front Panel OUT 1 and OUT 2 Switches
OUTPUTS 1 and 2 send signals to
Power Amplifiers and are switched
On/Off with the Front Panel OUT-
PUT 1 and 2 Switches
PHONO MC accepts
signals from a Moving
Coil phono cartridge
Rear Panel Connections
AUTO OFF Switch activates
the C22 Power Save Circuitry
IR INput for signals
from a compatible
IR Room Sensor
GND terminals accept
a ground wire from a
turntable
Loading ...
Loading ...
Loading ...