Loading ...
Loading ...
Loading ...
13
Headphones Jack
Connect a pair of dynamic headphones with a 1/4 inch
(6.3mm) stereo phone type plug to the Headphones
Jack for private listening.
HXD Mode
When Headphones are connected to the Front Panel
Headphone Jack, place the HXD
®
switch to the ON
position to activate the HXD
®
Circuitry. To deactivate
HXD
®
place the switch in the OFF position.
Note: HXD
®
improves the sound localization for Head-
phone Listening. HXD
®
restores the directionality
component of the spatial sound stage normally
heard with Loudspeaker listening.
Tube Light s
The MODE button on the Remote Control can be used
to toggle the Tube Lights on and off. Refer to page 9
for the Remote Control diagram.
Auto Off Switch
The C22 incorporates an Auto Off Feature, which
automatically places the Preamplifier into the Power
Saving Standby/Off Mode. This occurs approximately
30 minutes after there has been an absence of user ac-
tivity (includes changes to any of the Operation Func-
tions such as source selection, volume adjustment, etc)
or absence of an audio signal. If it is desirable to dis-
able the Auto Off Feature, place the Rear Panel AUTO
OFF Switch in the DISABLE position.
Reset of Microprocessors
In the unlikely event the controls of the C22 stop func-
tioning, the microprocessors can be reset by placing
the Front Panel STANDBY/ON Switch in the RESET
How to Operate, con’t
How to Operate, con’t
position by holding it in for fifteen seconds and then
releasing the switch.
Factory Reset
To return the C22 to its original factory settings, press
and hold the INPUT and VOLUME KNOBS for 5
seconds. The lights will turn off. Release the knobs.
Loading ...
Loading ...
Loading ...