Loading ...
Loading ...
Loading ...
Selecting the oven function
1. Switch on the oven with the On/Off button.
2. Press the or button repeatedly until the desired oven function appears.
A suggested temperature appears on the temperature display.
If the suggested temperature is not changed within approximately 5 seconds, the oven
begins to heat up.
3. The oven light is switched on as long as an oven function is started.
Changing the oven function
To change the oven function, press the or buttons repeatedly until the desired oven function
is displayed.
Changing the oven temperature
1. Press the or button, to raise or lower the temperature.
2. The setting changes in steps of 25°F.
Heating the oven and the Thermometer symbol
1. The slow flashing of the three segments of the thermometer symbol indicate how hot the
oven is as it heats up.
2. Once the oven has reached the programmed temperature, an audible signal sounds and the
three segments of the thermometer symbol stop flashing.
Heating the oven with Speedcook
After an oven function is selected, with the use of the additional function Speedcook, the
empty oven can be pre-heated in a relatively short time.
IMPORTANT:
Do not put the food to be cooked into the oven, until the Speedcook process is completed and the
oven is operating at the desired heat.
1. Set the desired oven function. If necessary, change the suggested temperature.
2. Press the Speedcook button. The thermometer symbol lights up.
3. The fast sequential flashing of the three segments of the thermometer symbol indicates
how hot the oven is as it heats up.
15
Loading ...
Loading ...
Loading ...