Loading ...
Loading ...
Loading ...
© FISHER & PAYKEL LIMITED 202 PAGE 469000269B PLANNING GUIDE MODULAR COOKTOPS VERSION B - OCTOBER 202
The models shown in this Planning Guide may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This Planning Guide should not be used as installation guidance for any product. Further information is required to safely and correctly install the
products featured here. Specific installation guidance will be available with the product on delivery and on our website fisherpaykel.com
BLOWERBOX CABINETRY
470 MINIMUM
570 RECOMMENDED
90 MINIMUM
ISOMETRIC VIEW
PLAN VIEW
CABINETRY FLOOR PANEL BLOWERBOX
BLOWERBOX CUTOUT
The Blowerbox requires a minimum cutout of 390mm x 470mm in base
of cabinetry so it can be positioned on the floor.
For ease of installation and connection to outlet ducting it is
recommended that the cutout is increased to 390mm x 570mm.
IMPORTANT
The position of the cutout may not be central to floor panel.
Pre-planning is required.
BLOWER BOX INSTALLATION OVERVIEW
1
Cut hole in bottom
of cabinetry panel
2
Lower blowerbox
onto floor.
3
Oversized hole
allows access to
connect ducting
4
Repostition blowerbox
to achieve alignment
with ducting.
PLANNING CONSIDERATIONS | MODULAR COOKTOPS
CONNECTOR
Loading ...
Loading ...
Loading ...