Loading ...
Loading ...
Loading ...
3 1/4’ ’×10’ ’ DUCT INSTALLATION
4.Mount 3 1/4″×10″duct on the top of the hood, using 5 screws(Included).
5.Seal with duct tape.
HOOD PREPARATION-HORIZONTAL DISCHAREG INSTALLATION 3 1/4’ ’×10’ ’ DUCT
INSTALLATION
1.Install the gasket (Included) on the top of the hood, as shown below.
2.Mount the shutoff plate on the top of the hood, using 10 screws(Included)
3.Seal with duct tape.
4.Install the adapter in the back of the hood, using 6 screws.
HOOD INSTALLATION
1.Insert the power cable in the hood and tighten the wire clamp to screw the cable.
2.Align hood’s keyhole mounting slots over the 4 partially installed screws.
3.Making sure the duct positions over the hood’s duct adapter, push the hood against the
rear wall.
ELECTRICAL CONNECTION
1. Using provided wire connectors, connect wires as follow: BLACK wire to BLACK
wire (A), WHITE wire to WHITE wire (B), GREEN or BARE wire to GREEN wire(C).
9 10
Loading ...
Loading ...