Loading ...
Loading ...
Loading ...
** Duct and roof cap/wall cap are not supplied.
Warning: to avoid the risk of fire, use only the metal ductwork.
HOOD PREPARATION
1.Remove the bottom panel of the hood by removing its (7) mounting screws and set
aside.
2.Punch out the wiring knock-out located on the top or back of the Unit.
HOOD PREPARATION-VERTICAL DISCHAREG INSTALLATION
1.Install the small shutoff plate inside the back of the hood. Using 10 screws
2.Install the large shutoff plate on the back of the hood. Using 5 screws.
3.Install the rubber gasket（Included）on the top of the hood. As shown below.
6’’ ROUND DUCT INSTALLATION
4.Mount 6’’ round duct on the top of the hood, using 10 screws
5.Seal with duct tape.
7 8
HOUSE WIRING
26"-32"
Loading ...
Loading ...
Loading ...