Loading ...
Loading ...
Loading ...
en Rapid heating
14
‒ When the food is ready, use to switch the ap-
pliance off.
Note:You can save your settings as "Favourites"
and use these again.
→"Favourites", Page20
8.6 Setting the type of heating and the
temperature
1.
Press "Types of heating" in the menu.
2.
Press the type of heating that you want to use.
3.
Press the temperature in °C or, depending on the
type of heating, the setting.
4.
Use the setting ring to set the temperature.
5.
Press
on the display to confirm the set temperat-
ure.
If required, you can implement additional settings:
– →"Rapid heating", Page14
– →"Time-setting options", Page15
– →"Microwave", Page16
– →"Ventilation function 'Crisp Finish'", Page18
6.
Press
to start the operation.
a The appliance starts heating.
a The setting values and how long the appliance has
already been in operation are shown on the display.
7.
If the operation is ended:
‒ If required, you can select other settings and re-
start the operation.
‒ When the food is ready, use
to switch the ap-
pliance off.
Note:The most suitable type of heating for your food
can be found in the description of the type of heating.
→"Types of heating", Page10
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1.
Press
.
2.
Press .
3.
Press the type of heating that you want to use.
4.
Reset the operation and use to start.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press
on the display.
2.
Press the temperature.
3.
Change the temperature with the setting ring.
4.
To confirm the change, press on the display.
a The change is applied.
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
1.
Press
"Info".
a Information is displayed for a few seconds.
2.
To scroll through lots of content in the message,
swipe over the display.
3.
If necessary, use
to exit the message.
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting.
Note:If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
1.
Change the "Lighting" basic setting to "Always off".
→"Basic settings", Page21
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Set the required operating mode.
→"Setting the operating mode", Page13
→"Setting the type of heating and the temperature",
Page14
3.
Set the required cooking time depending on the op-
erating mode.
→"Setting the cooking time", Page15
→"Time-setting options", Page15
4.
Use "End time" to set the time at which the opera-
tion should end.
→"Setting the end time", Page15
→"Time-setting options", Page15
5.
Place the food in the cooking compartment before
the appliance starts to heat.
6.
Press
to start the operation.
a The display shows the time remaining until the oper-
ation starts. The appliance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
7.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20minutes.
Note:If necessary, change the basic setting for the
lighting again.
Rapid heating
9 Rapid heating
R
a
p
i
d
h
e
a
t
-
i
n
g
To save time, rapid heating can shorten the preheat-
ing time for set temperatures over 100°C.
Rapid heating is possible for the following types of
heating:
¡ 4Dhot air
¡ Top/bottom heating
9.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
Loading ...
Loading ...
Loading ...