Loading ...
Loading ...
Loading ...
12
ENG
INSTALLATION INSTRUCTIONS
Please note
Electrical connection
The oven is fitted with a plug and must only be connected
to a properly installed earthed socket. The socket must only
be installed and connecting cable must only be replaced
by a qualified electriciaan, and in accordance with the
appropriate regulations.
If the plug is no longer accessible following installation, an
all-pple isolating switch must be present on the installation
side with a gap of at least 3mm.
The fitted cabinet must not have a back wall behind the
appliance.
A gap must be maintained between the wall and the base
of the unit above. Specific gap size could be referenced by
the diagrams.
Minimum installation height: 85 cm.
Do not cover ventilation slots and suction holes.
Please Read the Manual Carefully Before Installation
NOTE
Do not trap or bend the power cable.
Screw A
Screw B
Mounting Plate
Trim-kit plastic cover
Footpad Block
Bracket
Rubber Pad
Loading ...
Loading ...
Loading ...