Loading ...
Loading ...
Loading ...
General Settings
Select > SETTINGS.
NOTE: When a check box is filled, the option is on. When the check box is clear, the option is off.
DEVICE NAME: Sets a name for this device.
LANGUAGE: Sets the language used on the device.
TUNER REGION: Sets the region used by the FM and AM sources.
This setting is also needed to configure DAB and SiriusXM sources.
TELEMUTE: Sets the behavior of the stereo when it detects a signal on the TELEMUTE wire in the wiring
harness. This is commonly used to change to the Aux1 source when you hold the button on a Fusion
handheld microphone. You can also choose to either mute the audio or change to the Aux1 source when
connected to a hands-free mobile phone kit. See yourFusion handheld microphone or hands-free mobile
phone kit instructions for more information.
NOTE: This setting does not affect a phone connected to the stereo using Bluetooth technology.
POWER OPTIONS: Adjusts the power settings, such as the power-save mode (Power Options, page22).
SEARCHING: Enables Fusion Alpha Search Technology (FAST), which allows you to quickly search for tracks by
letter or number. You can select a number to enable the FAST menu if your music device contains more than
the selected number of items.
ZONE: Enables you to configure the speaker zones (Speaker Zone Settings, page19).
SOURCE: Allows you to enable, disable, and name the sources on the stereo (Source Settings, page22).
UPDATE: Updates the stereo or connected devices using the appropriate update file on a connected USB flash
drive (Update Options, page22).
NOTE: It is not necessary to use this menu if you are updating the software using the Fusion-Link app on a
mobile device instead of using an update file loaded onto a USB flash drive.
UPDATE > FACTORY RESET: Restores all settings to the factory default values.
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Disabling the Internal Amplifier
If you do not connect speakers directly to zones 1 and 2, you can disable the internal amplifier to reduce power
consumption.
1 Select > SETTINGS.
2 Select ZONE.
3 Select INTERNAL AMP ON to clear the check box.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the dial.
1 Select > SETTINGS.
2 Select ZONE > ASSIGN HOME ZONE.
3 Select a zone.
Synchronizing the Source and Zone Volume Levels
You can synchronize the volume levels on one or all zones with some source devices, such as a Bluetooth,
AirPlay
®
, or UPnP source.
1 Select > SETTINGS.
2 Select ZONE > PHONE VOLUME SYNC.
3 Select a zone or ALL.
When you adjust the volume on the connected source, the volume on the selected zone is also adjusted.
General Settings 19
Loading ...
Loading ...
Loading ...